bumonskateboard6 Posted March 7, 2011 Report Posted March 7, 2011 Don't just use a sheet metal screw if you're grounding it to a piece of sheet metal. Get to a spot where you can get on the underside and use a nut and bolt and sand down the whole area to remove all the paint. That's about the best you can do on a unibody car without running a ground to the front. Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
Alex K Posted March 7, 2011 Report Posted March 7, 2011 Don't just use a sheet metal screw if you're grounding it to a piece of sheet metal. Get to a spot where you can get on the underside and use a nut and bolt and sand down the whole area to remove all the paint. That's about the best you can do on a unibody car without running a ground to the front. You can do that, but I have a unibody car and I grounded to my rear deck with just a screw and it was fine for my olddd kicker 750.1 Quote 2006 Nissan Z Track. My Feedback Thread i used to think a band pass was something you were around your neck or something.
ClarkB Posted March 8, 2011 Author Report Posted March 8, 2011 Finally fixed my problem it was a major voltage issue, i never noticed but the positive terminal on my battery had a layer of corrosion over it so i sanded it down and now i the voltage i need to power the subs, and everything is now working perfectly! Quote Current Setup: 90' Lumina (My Hoopty) (2)15 inch Phantom Woofers (1)3000-watt amp. 1500w RMS -120 amp alt. -JVC Deck. -JVC 4x6's and 6x9's. -Dual Battery powered. -All 0 Gauge. -Big 3 Soon2come.
BFF Larry Posted March 8, 2011 Report Posted March 8, 2011 Finally fixed my problem it was a major voltage issue, i never noticed but the positive terminal on my battery had a layer of corrosion over it so i sanded it down and now i the voltage i need to power the subs, and everything is now working perfectly! sweet, thats good to hear ur problems fixed! Quote Team Clearly Louder (MECA)Team DC Audio ++* SELLING the CACTUS SOUNDS K12 for $1550 shipped *++ HMU!!! 3 flips. nollie flips. big flips. hardflips. - steez Youtube Channel My Build Log 95 Bonneville SSE - WALLED/4th Order - ~30 cubes - *thanks LoganBerry, CortezDVT, Cj18, SuperCharged DC, Ryan-RAM Designs,LoudNLow931*
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.