LZTYBRN Posted April 7, 2011 Report Posted April 7, 2011 Amps I'm considering: AQ750 http://www.audioque.com/AQ750-Amplifier_p_46.html DTS-1000.1 http://www.sonicelectronix.com/item_32465_RE-Audio-DTS-1000.1.html These will be for four Rockford P1S415's wired down to 1 ohm. I know AQ makes solid amps, but for a price that's a bit higher than the RE amp. And I haven't been able to find any reviews on RE amps, so I'm not sure what to expect quality-wise. Anyone have experience with either of these? Quote
speedball1978 Posted April 7, 2011 Report Posted April 7, 2011 for 50 dollars more you could get the aq1200 instead Quote
skittlesRgood Posted April 7, 2011 Report Posted April 7, 2011 AQ gets my vote just because the RE isnt certified. that might mean nothing but nothing else pops out at me. Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people.
LZTYBRN Posted April 7, 2011 Author Report Posted April 7, 2011 Then I would be overpowering them at 1 ohm or underpowering them at 4 ohms. Quote
LZTYBRN Posted April 7, 2011 Author Report Posted April 7, 2011 I was also leaning toward AQ. What do you mean by certified? Quote
Azagtoth502 Posted April 7, 2011 Report Posted April 7, 2011 CEA certified, basically means they prove the amp meets spec Quote pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls
speedball1978 Posted April 7, 2011 Report Posted April 7, 2011 with the aq1200 you won't be over powering them if you set the gains right Quote
billy101 Posted April 7, 2011 Report Posted April 7, 2011 Then I would be overpowering them at 1 ohm or underpowering them at 4 ohms. You can always use a clamp meter on the amp @ 1ohm and set gains so that you're not overpowering it.... Quote First System 2002 Impala LS 3.8L V6, 128,365k miles. Alternator: DC Power 190Amp H/O Alternator Headunit: Kenwood KDC-BT945U. Speakers: MBQuart 6.5" Comps, 6x9 3-way. Amplifer: Eclipse 3322 on front 6.5 components, and a Infinity Kappa One @ 2ohm- 800w Subwoofers: 2 REAudio SRX12D2 wired to 2 ohm. Box: 3.1cuft box tuned to 33hz. sealed off to cabin Big 3- done with all Knukonceptz KCA 0 gauge. Don't drop below 14.1v at full tilt.
speedball1978 Posted April 7, 2011 Report Posted April 7, 2011 and you could wire it down to 2 ohms Quote
Bakerman Posted April 7, 2011 Report Posted April 7, 2011 The AQ1200 brother...and you could always just keep the gain down...its only like $50 more...and you can never have too much powa! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.