d_Ryan Posted May 2, 2011 Report Posted May 2, 2011 This video shows how i set up my 12" earthquake sub and amp in my garadge, wit an rca signal coming from my sony shelf system. Even though you can hear the music, no speakers are connected, its only the sub... Why is this happening???
hdorre Posted May 2, 2011 Report Posted May 2, 2011 That is probably a fullrange signal going from the Sony receiver to the sub. You need a Low Pass Filter to block out the highs. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
hdorre Posted May 2, 2011 Report Posted May 2, 2011 Look on PartsExpress.com On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
d_Ryan Posted May 2, 2011 Author Report Posted May 2, 2011 Ok, well i grabbed another power supply to power an alpine HU i had laying around. I plugged the RCA cables from the amp into SW port of the HU, and it doesnt play any sound. It will play all notes through the Speaker ports but nothing through SW port. Shouldnt the alpine filter the low notes and allow this to work?? Thanks.
RooTxBeeR Posted May 2, 2011 Report Posted May 2, 2011 A HU can have those settings, but its not "supposed" to, you have to set it to do that. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
EclipseChris Posted May 2, 2011 Report Posted May 2, 2011 On the amplifier does it have lpf hpf or full written on it anywhere? i resolve to be a nicer moderator. Tercel build R.I.P. Eclipse build Old New V-Dub My feedback.
d_Ryan Posted May 2, 2011 Author Report Posted May 2, 2011 A HU can have those settings, but its not "supposed" to, you have to set it to do that. What do you mean? How would you "set" it to play only low notes? On the amplifier does it have lpf hpf or full written on it anywhere? Yes, but changing it doesntr help much.
Guest Posted May 2, 2011 Report Posted May 2, 2011 On the amplifier does it have lpf hpf or full written on it anywhere? Yes, but changing it doesntr help much. so flipping the switch to LPF does nothing? is there a knob associated with it?
d_Ryan Posted May 3, 2011 Author Report Posted May 3, 2011 Sorry, i thought there was but there isn't. All there is, is a Crossover frequency filter setting.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.