snafu Posted May 31, 2011 Report Share Posted May 31, 2011 The work is done - now, it's time for a victory lap. Stay tuned for even more video of this car, as well as numerous others! Quote Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
optical Posted May 31, 2011 Report Share Posted May 31, 2011 so how does that compare to your beast? Quote Link to comment Share on other sites More sharing options...
Hotdog Posted May 31, 2011 Report Share Posted May 31, 2011 nice patiently waiting for next vid now Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Socky Posted May 31, 2011 Report Share Posted May 31, 2011 That is just sexy sounding Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
FieroGrande Posted May 31, 2011 Report Share Posted May 31, 2011 I wouldn't mind seeing this Quote Link to comment Share on other sites More sharing options...
snafu Posted May 31, 2011 Author Report Share Posted May 31, 2011 so how does that compare to your beast? Hard to say - mine makes around 800 horsepower and weighs 3,900 pounds. I bet this Mustang weighs 1,000 pounds less. The owner has a few more things to do yet before he gets it tuned on the chassis dyno. If it makes 500 hp at the wheels (and it should), it should be a low 10 second car. Mine needs a different converter as the one in it is slipping at times. Even still, mine won't run low 10s . . . Right now, mine runs great and his still needs a bit of work. Quote Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.