TheNewbie Posted June 17, 2011 Author Report Posted June 17, 2011 Oh okay, so it goes to the amp, i've been watching the vids that are going to the battery maybe for a dif use. Thanks man appreciate it. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted June 17, 2011 Author Report Posted June 17, 2011 (edited) Sorry for the 20 question game, so one more question, i dont' have to set anything as dc said, as long as i hook it up to my amp instead of my battery? To give me more wire room toplay with can i hook it up from the wires behind the headunit, instead of the ones on the amp. Thanks for any help. Edited June 17, 2011 by TheNewbie Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
__d_a_v_i_d__ Posted June 17, 2011 Report Posted June 17, 2011 Think about it, your amps are connected to the battery. Soooo. Same thing Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!!
BassJunkie Posted June 17, 2011 Report Posted June 17, 2011 Stingers are nice when they work right. Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
Supercharged DCs Posted June 17, 2011 Report Posted June 17, 2011 You may have to set something, it's very possible I'm wrong. Wouldn't be the first time Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
TheNewbie Posted June 17, 2011 Author Report Posted June 17, 2011 Haha alright then i couldn't do it from behind my headunit, instead i'll go with what you guys are saying go straight from my amp, unless it is possible from behind the headunit seeing how there is a constant power that you have to hook up, as well as a ground, and the remote wire is there that goes to the amp, with what little knowledge i have im thinking this could work. Sorry if this is what you were suggesting david and i just didn't catch on and Super, usually your right on the forums i've been reading hehe but just incase maybe someone can come along and give us both some knowledge if it still has to be set. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
BassJunkie Posted June 17, 2011 Report Posted June 17, 2011 (edited) Haha alright then i couldn't do it from behind my headunit, instead i'll go with what you guys are saying go straight from my amp, unless it is possible from behind the headunit seeing how there is a constant power that you have to hook up, as well as a ground, and the remote wire is there that goes to the amp, with what little knowledge i have im thinking this could work. Sorry if this is what you were suggesting david and i just didn't catch on and Super, usually your right on the forums i've been reading hehe but just incase maybe someone can come along and give us both some knowledge if it still has to be set. Do not hook it up behind the head unit, the reading will not be accurate. You want a volt meter to monitor the voltage your amp is getting, so put it as close to the amplifier as possible. Edited June 17, 2011 by BassJunkie Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
TheNewbie Posted June 17, 2011 Author Report Posted June 17, 2011 Alright thanks man, the wires behind the stinger aren't very long, so would there be a way i can make them longer? Im sure this is a simple answer im just to dumb to think of it Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Supercharged DCs Posted June 17, 2011 Report Posted June 17, 2011 Speaker wire spliced into the end of the voltage meter's wires. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
TheNewbie Posted June 17, 2011 Author Report Posted June 17, 2011 haha alright will that still give me an accurate reading? Seeing how it's got more wire to travel through. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.