matt14 Posted June 22, 2011 Report Posted June 22, 2011 So, i bought some aeros off of parts express and had the wood cut for my box. Hoping that i can start and build this week sometime, so i have a question for those of you who have used aeros. Do you somehow support the ports in the box? If so, what do you use to help support it. Im going with two 6" aeros in my box . 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3
bre2ts Posted June 22, 2011 Report Posted June 22, 2011 i did mine like this i believe that parts express saids the cut out should be 8 1/4" i think i 8 7/16" inch was what i ended up using Feedback 1 | Feedback 2 you win some, you lose some
matt14 Posted June 22, 2011 Author Report Posted June 22, 2011 Is that board going to be attatched inside the box? Im looking at supporting it inside the box if neccasary 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3
bre2ts Posted June 22, 2011 Report Posted June 22, 2011 yea its for inside the box Feedback 1 | Feedback 2 you win some, you lose some
matt14 Posted June 22, 2011 Author Report Posted June 22, 2011 My bad, I get it now. Looks good. Those are 6" aeros right? . Did you flush mount the ports, and what size router bit did you use. 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3
bre2ts Posted June 22, 2011 Report Posted June 22, 2011 yea they're 6" aeros not flush mounted used 1/4" down spiral bit and jasper jig Feedback 1 | Feedback 2 you win some, you lose some
matt14 Posted June 22, 2011 Author Report Posted June 22, 2011 Coo thanks. Probably going that same/simalar route. 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3
skittlesRgood Posted June 22, 2011 Report Posted June 22, 2011 ive had mine supported and unsupported. not a big difference. but mine rest on the bottom of the box anyways. alpine had external aeros and he gained by stiffening them up. i think he used althread. If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.