jconnway Posted June 24, 2011 Report Posted June 24, 2011 Is it unwise to wire 2 4ohm speakers to a 2ohm load if the speakers are different sizes. For example, a set of 6x9s and a set of 5.25s off the same channel Full Pioneer Build 4 Per Door - Front Door Build Up
Hotdog Posted June 24, 2011 Report Posted June 24, 2011 that would be fine to do as long as the amp is 2ohm stable per channel. I have my 6x8 and tweeters wired on the same channel at 2ohm (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
jconnway Posted June 24, 2011 Author Report Posted June 24, 2011 how isn't your frequency range for the x8s too much for the tweeters to handle Full Pioneer Build 4 Per Door - Front Door Build Up
Hotdog Posted June 24, 2011 Report Posted June 24, 2011 Tweeters have passive crossovers inline (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
jconnway Posted June 24, 2011 Author Report Posted June 24, 2011 got it. another thing, could i run a 4ohm set of comps, using the crossover AND a set of coaxials off the power in on the crossover.. because wouldnt that essentially be the same as wiring a 4ohm speaker to another 4ohm speaker to make 2 ohm? Full Pioneer Build 4 Per Door - Front Door Build Up
Recommended Posts
Archived
This topic is now archived and is closed to further replies.