MrJustinDanger Posted June 30, 2011 Report Share Posted June 30, 2011 I have 2 Kenwood Excelon XW-1224d and I dont know what dimensions I should make the box! At the end of this document is what they recommend for a single sub..dunno if you need it http://manual.kenwood.com/files/B61-1325-00.pdf Dimensions what will FIT in my trunk. Width: 34" Height: 13-14" Depth: 16-17" Quote Link to comment Share on other sites More sharing options...
RooTxBeeR Posted June 30, 2011 Report Share Posted June 30, 2011 Well when you build your box, first, sealed or ported? Then, you want to build the box to get the acquired space needed, for sealed once you get a dimension your done. For ported you need to make sure that the gross volume ends up being what the manual says, which is after you take into account the port and woofer displacement. I tried to come up with a design for you, but from what I am seeing, you will need more space to be able to get the acquired 3.0 Cu after displacement, your dimensions have a Net volume of 3.64 Cuft, theres no way you can make it down to that. My boxes net volume is 4.49 Cu, and after displacements its down to 3. Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
MrJustinDanger Posted June 30, 2011 Author Report Share Posted June 30, 2011 Well when you build your box, first, sealed or ported? Then, you want to build the box to get the acquired space needed, for sealed once you get a dimension your done. For ported you need to make sure that the gross volume ends up being what the manual says, which is after you take into account the port and woofer displacement. I tried to come up with a design for you, but from what I am seeing, you will need more space to be able to get the acquired 3.0 Cu after displacement, your dimensions have a Net volume of 3.64 Cuft, theres no way you can make it down to that. My boxes net volume is 4.49 Cu, and after displacements its down to 3. Damn, I know the trunk is kind of small I just want to make sure everything is how it should be! How much bigger are we talking? Quote Link to comment Share on other sites More sharing options...
RooTxBeeR Posted June 30, 2011 Report Share Posted June 30, 2011 Might need around what I am have for my space, the subs I am using require the exact same space and I have a total of 4.49cu, then after everything I got it down to 3.0 Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
MrJustinDanger Posted July 1, 2011 Author Report Share Posted July 1, 2011 I went and remeasured my car and I can go Width: 36" Height: 15" Depth: 19" Dunno if this really makes a difference or not... Quote Link to comment Share on other sites More sharing options...
DeepBassAddiction Posted July 4, 2011 Report Share Posted July 4, 2011 (edited) Well when you build your box, first, sealed or ported? Then, you want to build the box to get the acquired space needed, for sealed once you get a dimension your done. For ported you need to make sure that the gross volume ends up being what the manual says, which is after you take into account the port and woofer displacement. I tried to come up with a design for you, but from what I am seeing, you will need more space to be able to get the acquired 3.0 Cu after displacement, your dimensions have a Net volume of 3.64 Cuft, theres no way you can make it down to that. My boxes net volume is 4.49 Cu, and after displacements its down to 3. What about a outer aero-port? Edited July 4, 2011 by CutlassTakenDumps Quote -My Box BuildLog- -FREE DDZ's- Link to comment Share on other sites More sharing options...
DeepBassAddiction Posted July 4, 2011 Report Share Posted July 4, 2011 Well when you build your box, first, sealed or ported? Then, you want to build the box to get the acquired space needed, for sealed once you get a dimension your done. For ported you need to make sure that the gross volume ends up being what the manual says, which is after you take into account the port and woofer displacement. I tried to come up with a design for you, but from what I am seeing, you will need more space to be able to get the acquired 3.0 Cu after displacement, your dimensions have a Net volume of 3.64 Cuft, theres no way you can make it down to that. My boxes net volume is 4.49 Cu, and after displacements its down to 3. What about a outer aero-port? Quote -My Box BuildLog- -FREE DDZ's- Link to comment Share on other sites More sharing options...
RooTxBeeR Posted July 4, 2011 Report Share Posted July 4, 2011 That could work, I don't know anything about aero ports and how they effect tuning, can't help on that Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
MrJustinDanger Posted July 4, 2011 Author Report Share Posted July 4, 2011 I dont know what that is! hehe Quote Link to comment Share on other sites More sharing options...
BJD3 Posted July 4, 2011 Report Share Posted July 4, 2011 (edited) It needs bracing, but the space he gave is workable. It would only be slightly smaller than what he needs, but that's a negligible amount. Edited July 4, 2011 by BJD3 Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.