chevy suspension help.

[GroundPounderz]

i have a 1995 chevy tahoe and i was wondering if i could fit 35's under it with a 3 inch lift

[badasschevy]

i have a 1995 chevy tahoe and i was wondering if i could fit 35's under it with a 3 inch lift

with stock wheels, and some minor trimming they will fit.

[Mert]

i can almost clear 35s with just a 3" bl. if you crank the torsions you should be fine with a 3"

[lifted_silverado]

I dnt see it clearing when you make a turn, def. Gonna hit the fender wells. Buy a bigger lift, or cheap out and trim. Width of the tires will play a role also

[bassaholicsfl]

3in suspension and 3in body should be fine. crank those keys and you can if you scrub any just trim alil. friend of mine has 33s with only torison bars cranked. im fixing to take the body lift out of mine just go with one inch body and put it on 33s. 35s to expensive for me

[vicjac1]

I would so no, I had a silverado with a 6" lift 20x12 and 35s and I still had to cut about 3" off my front bumper and some off the fender well lining. Also depends on what type of offset wheel you'll run. Hope this helps

[99fullsizechevy]

No you cannot, it is to wide, you can crank your bars about an inch and add a key, and a 3 inch block for a 3 inch suspension, that would clear 33 12.50s on an 8 inch wide rim, even adding a 3 inch body on top of that, it still requires trimming or with a 305 size tire.. bout a 34-34.5 x 12 no trimming