Immutablemoney Posted July 22, 2011 Report Share Posted July 22, 2011 the single sa 15 would be 235. Or $170 in the B stock thread on here Quote Link to comment Share on other sites More sharing options...
Blazer Boy280 Posted July 22, 2011 Report Share Posted July 22, 2011 the single sa 15 would be 235. Or $170 in the B stock thread on here whats b stock? Quote My Build:Blazer Got Bass Link to comment Share on other sites More sharing options...
Immutablemoney Posted July 22, 2011 Report Share Posted July 22, 2011 the single sa 15 would be 235. Or $170 in the B stock thread on here whats b stock? Here ya go http://www.stevemeadedesigns.com/board/topic/114511-sundown-used-b-stock-items/ Quote Link to comment Share on other sites More sharing options...
keepinitloud Posted July 22, 2011 Report Share Posted July 22, 2011 If you want trunk space one fifteen or to twelves is goin to take up alot of your trunk I have one fifteen in my 300 and my trunk can now only hold a few groceries or beer that's it I don't know what you like to throw in the trunk but 1 twelve or two 8's would be my suggestion if you need your trunk Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
sebringR/T Posted July 23, 2011 Author Report Share Posted July 23, 2011 If you want trunk space one fifteen or to twelves is goin to take up alot of your trunk I have one fifteen in my 300 and my trunk can now only hold a few groceries or beer that's it I don't know what you like to throw in the trunk but 1 twelve or two 8's would be my suggestion if you need your trunk I know the SAs are going to take up more space than I currently am. Right now I'm at 3 cu. ft. with my Orions and I know the SA-12s call for 2cu. ft. per sub. Now with that being said does anyone have the RMS ratings on the 12 and the 15? I know that when building boxes you need to factor in how much power you will be running to the sub, and I will probably be over powering them with my eD NINe.1. Quote Team Droppin' Hz Tuxedo Black Metallic 2010 Ford Taurus Limited Build Log "Financial Mistake" Link to comment Share on other sites More sharing options...
Supercharged DCs Posted July 23, 2011 Report Share Posted July 23, 2011 The SA-10, 12, and 15 are rated to take 600w each, though they can take quite a bit more than that. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
sebringR/T Posted July 23, 2011 Author Report Share Posted July 23, 2011 The SA-10, 12, and 15 are rated to take 600w each, though they can take quite a bit more than that. So in order to run at 1ohm on my NINe.1 I would need a single D2 SA-15, correct? Quote Team Droppin' Hz Tuxedo Black Metallic 2010 Ford Taurus Limited Build Log "Financial Mistake" Link to comment Share on other sites More sharing options...
JPagan Posted July 23, 2011 Report Share Posted July 23, 2011 The SA-10, 12, and 15 are rated to take 600w each, though they can take quite a bit more than that. So in order to run at 1ohm on my NINe.1 I would need a single D2 SA-15, correct? yes Quote Link to comment Share on other sites More sharing options...
sebringR/T Posted July 24, 2011 Author Report Share Posted July 24, 2011 So pulling everything together into one question... Since I will be nearly doubling the RMS rating running the SA-15 at 1ohm off my NINe.1, would my box need to be larger or smaller than spec? Quote Team Droppin' Hz Tuxedo Black Metallic 2010 Ford Taurus Limited Build Log "Financial Mistake" Link to comment Share on other sites More sharing options...
JPagan Posted July 24, 2011 Report Share Posted July 24, 2011 So pulling everything together into one question... Since I will be nearly doubling the RMS rating running the SA-15 at 1ohm off my NINe.1, would my box need to be larger or smaller than spec? Usually when running more power you will want to go with a smaller box. So with your power I would do 3 cubic feet net. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.