Jonmichael Posted August 19, 2011 Report Posted August 19, 2011 I used my DD-1 to set the HU using the 0db tracks and got 43/50 then after that I went to the amp to set its gain I had it exactly like the directions but when I used the 40hz -10db track the DD-1 still didn't detect any distortion. Is this correct? Btw the amp is an Alpine pdx m12. I don't know if I did anything wrong or what is up. Any advice would be greatly appreciated. I also looked around the forum and didn't see any topic having a like situation. Quote
UnderLoK Posted August 19, 2011 Report Posted August 19, 2011 Still didn't detect any when you turned up the gain? Make sure you didn't turn subsonic way up rather than down/off. Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts
Jonmichael Posted August 19, 2011 Author Report Posted August 19, 2011 Yup. Nothing. Subsonic is off. Idk what else it could be. Quote
n8ball2013 Posted August 19, 2011 Report Posted August 19, 2011 did you try the -5? Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Jonmichael Posted August 19, 2011 Author Report Posted August 19, 2011 No. I'll go ahead and try that. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.