Jump to content

Recommended Posts

Posted

:popcorn: :popcorn: More Pics!!!! :popcorn: :popcorn: :popcorn: :popcorn:

Edit: Looks Great. Im thinking of doing the same accept on the rear doors..

2001 is300Headunit: JVC KD-X50BTHighs/Mids: StockHigh/Mids Amp: NASubwoofer: DC Audio LV4 12"Subwoofer Box: DLDesigns Box tuned to 32HzSubwoofer Amp: AQ 2200DElectrical: NA Performance:SRT Racing intake with ECUHKS Super Dragger 2BC Racing Coilovers

BC 264 stage 2 cams

full head build with BC Valves, Retainers, and springs

Dezod Green Race Header Comming soon/Thinking about<p>Electrical: XS power under the hood (Suggestions Welcome)​Performance: BC Cams,Cam gears, maybe GTE Swap down the lineMy YouTube Channel Subscribe and i'll return the favor!Xbox Live Team Website.My First Official Box Build.My FacebooK

Posted

:popcorn: :popcorn: More Pics!!!! :popcorn: :popcorn: :popcorn: :popcorn:

Edit: Looks Great. Im thinking of doing the same accept on the rear doors..

Thanks.:)

I was thinking about doing the rear doors too but my backseats are out and they might stay out it just depends. I think Im going to do some cutting on the trunk to cabin hole being its only 12" by 24" i may make it 18" by 36" so i can have more air getting into the cabin and I might possibly build another box and seal it off if I do some cutting. I'm doing some planning right now hopefully I will figure out a good plan.

Pics will be updated as I get more done.:)

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Posted

I went to a local comp and did a 145.9 at 40hz today.:) and I was doing a 145.4 at 34hz:) I'm happy I'm in the 45's now. Now I just need 4.1 db's :) I'm thinking since I only have a single batt. that I will gain something on the meter if I get a couple more batts and keep stable votage. Over all I am very pleased with my numbers.

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Posted

I went to a local comp and did a 145.9 at 40hz today.:) and I was doing a 145.4 at 34hz:) I'm happy I'm in the 45's now. Now I just need 4.1 db's :) I'm thinking since I only have a single batt. that I will gain something on the meter if I get a couple more batts and keep stable votage. Over all I am very pleased with my numbers.

Nice looking numbers Congrats man! Keep it up your almost there!

No car at the moment.

New system:

2 Skar Audio VVX-12s

Crescendo bc2000d

Carquest NGT battery (back)

Deka battery (front)

Posted

Thanks guys, I still have a few tricks up my sleeve I think I can get to the 48's without spending almost any money.... First My box is screwed to the floor so I could'nt move it around without taking a sub out and unscrewing it so I'm sure I would've gained something there (I stay in apartments or I would'nt worry about it being screwed down). I am gonna do some more work and get it metered again.

I was at a 43.97 with the old box, I built the new one designed by ME :) and hit a 45.9 :) I'm liking the gains I will not stop till I hit a 50+ out of the trunk with subs facing the back of the car. It will be frustrating and challenging but it's gonna happen.

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Posted

nice... :drink40:

Pioneer Premier P880PRS ll Front Stage: US Acoustics 4060 - Random speakers currently ll Sub Stage: Crescendo BC3500D - 15" Xcon sealed @ 3.28 cubes ll Electrical: - Kinetik HC1800(front) NEW***DieHard P-2(rear)

beaker- I know this sounds like a lot of anime bullshit, but it is true.

  • 2 months later...
Posted

Ok this has'nt been updated in a while. Soo

IMG_1462.jpg

IMG_1456.jpg

Bondo, resin & mat in the corners

IMG_1468.jpg

Before it got sanded and sub hole were cut.

IMG_1475.jpg

A sneak peek at my door panel in the making.IMG_1476.jpg

I have to see what other pics I took and upload them. But this new box is tuned to 34hz with 20in2 of port and it gets nasty, nasty low for a 34hz tuning imo.

Every single corner in the box got 3 layers of mat & resin, then a little more resin, then bondo. The box is currently in my trunk and sounds great.

I also got HIDs 55w 8k.

A bunch of 1/0awg ofc.

A motorized trunk release.

And finally a 2 way with remote start ftmfw.

I will throw up some pics of everything soon.

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Posted

im jealous of your very large trunk

Lol. The box is 36"w 25"d 17"h

It barely fit I had to kick the box in. Lol but my trunk is fairly big though. :)

One of my old boxes was 38"w 26"d 15.5"h

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 4706 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...