HELP: Stuck Between Ports...

[DeepBassAddiction]

AFTER brcing, subwoofer, AND port displacements. A big L port eats into your net displacement in a big way. So shoot for like 9 cubes before any displacements. I'd seriously go with a couple nice 12's tuned around 34-35 and call it done in the space we know you have.

Well wouldn't the l port its self take the place of bracing along with the 45°s in the corners?

[CleanSierra]

Your Width of 8" is way too wide for a slot port in that volume. I'm going to bed, maybe someone else can help. My advice is download the Torres calculator found in this forum and play with it yourself. It will give you much more accurate results. And the port ITSELF is inside the box so that decreases your volume. Try a width on your port of about 4 inches.

Edited August 31, 2011 by CleanSierra

[DeepBassAddiction]

Your Width of 8" is way too wide for a slot port in that volume. I'm going to bed, maybe someone else can help. My advice is download the Torres calculator found in this forum and play with it yourself. It will give you much more accurate results. And the port ITSELF is inside the box so that decreases your volume. Try a width on your port of about 4 inches.

I can get it up to 9⁴s by bringing my depth up to 26"... puts it at 9.00⁴ft

[DeepBassAddiction]

V

Your l-port doesn't have any air space left for subs and is tuned to 92 Hz before displacements and .68 cu ft after port displacement. Your Aeroport design is better but a little small on port area and with estimated displacement of just subs you are sitting at about 35 Hz. Net air space in the Aeroport box is a little under 5 cubes. Not enough air space IMO.

What if I got with the 6⁴ft and a Aero port? I'm thinking now about not going L port... but I love the way a L looks. Then again I can take my Aero n put my port outta the box

[michigancapri92]

if you are bent on a L port go to http://reaudio.com/box.php and play with that

[tctdh11]

if you are bent on a L port go to http://reaudio.com/box.php and play with that

The RE calc is off quite a bit by what I'm told

Here's the torres calculator man if you can't find it. Torres Calculator

[DeepBassAddiction]

if you are bent on a L port go to http://reaudio.com/box.php and play with that

The RE calc is off quite a bit by what I'm told

Here's the torres calculator man if you can't find it. Torres Calculator

Tyvm.

One more question. How far off a box wall should a aero port be? Or dose it not matter?

[CleanSierra]

At least the width of the port itself. If it's an 8" port, 8" from any obstruction. Did you download the Torres?

[DeepBassAddiction]

At least the width of the port itself. If it's an 8" port, 8" from any obstruction. Did you download the Torres?

I have to wait till my room mate gets back from Florida so I can use her lap top... till then I got my android