littleitaly1990 Posted November 3, 2007 Report Share Posted November 3, 2007 (edited) to wire 2 rf t10001's a rf p500-2 and p200-2 ??? Its going into a 96 Jeep Grand Cherokee...Also how should I wire those amps if Im using them to power 2 BL's? Make one a slave? I need to buy this stuff but I dont wanna make 50 trips to the store b/c I didnt know I needed something...thanks Edited November 3, 2007 by littleitaly1990 Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
littleitaly1990 Posted November 3, 2007 Author Report Share Posted November 3, 2007 bump.... Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
Chris Posted November 3, 2007 Report Share Posted November 3, 2007 You'll have to set one T1000 as master, one as slave & then run a pair of rca's from the output of the master into the slave & then they will both controlled by the one bassknob & settings on the master amp. The gain & settings on the slave amp can be used for fine tuning still. As for the list & such, if I have time in a lil bit I'll hook you up. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
littleitaly1990 Posted November 3, 2007 Author Report Share Posted November 3, 2007 You'll have to set one T1000 as master, one as slave & then run a pair of rca's from the output of the master into the slave & then they will both controlled by the one bassknob & settings on the master amp. The gain & settings on the slave amp can be used for fine tuning still.As for the list & such, if I have time in a lil bit I'll hook you up. strait thats what I thought with the amp but I wanted to be sure....and if you have time to do that it would be more than appreciated... Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
AI James Posted November 3, 2007 Report Share Posted November 3, 2007 since you asked about parts, dont forget distro blocks/ terminals /and wire. i know its little stuff but the little stuff always bites you in the ass later Quote Link to comment Share on other sites More sharing options...
Coolwazabi Posted November 3, 2007 Report Share Posted November 3, 2007 zipties.. don't forget those... may not be REQUIRED but help with keeping it look clean Quote Link to comment Share on other sites More sharing options...
littleitaly1990 Posted November 3, 2007 Author Report Share Posted November 3, 2007 alright so zip ties, a lota 0 guage, 4 gauge, distro blocks/ terminals...ne thing else Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
littleitaly1990 Posted November 4, 2007 Author Report Share Posted November 4, 2007 N E Thing Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
littleitaly1990 Posted November 11, 2007 Author Report Share Posted November 11, 2007 BUMP ....alright guys I went shopping but I'm not wire savvy so Im lost....Im wiring 2 rf t10001s, 1 p500-2 and 1 p200-2....I got 50 feet of 1/0 gauge...what else do I need and how do I wire it ???? Please help! Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
JustinT Posted November 11, 2007 Report Share Posted November 11, 2007 As a general rule...You should go back and look at other people's builds to see what they did that you don't understand. Quote "IT SOUNDS SLOW MOTION AND STUTTERING"~~~~LOL 2 15" Fi BTLs 7.5 cf box @ 33hz Sundown SAZ-3500D Powermaster S3400 & D3100 Iraggi 300a alt SecondSkin - totally dead Knu wire Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.