Jump to content

97 blazer build 1 18' T3 T.S.N.S 4500 rms daily


Recommended Posts

Sooner or later (preferably sooner) you might wanna take another whack at that box. Yeah, you've got some great equipment and its nice you attempted box building. But that box is not so nice, and I bet tuning is way off. Not to mention you could easily get enough airspace for one 18 to get it under the window line and give the port some real room between it and the hatch. I'm just saying, you are clearly a noob with great equipment, and if the equipment doesn't live up to your expectations, don't sell it (like a lot of noobs do). Most likely you just need to rebuild a proper box. I mean that in the nicest way possible, you can always get a design from RAMdesigns or Ray or whoever else is doing quality sketchup designs. Anyway, keep the thread updated.

Also, how do you plan to run a Sundown 4500 at 1 ohm with a D1 sub?

It's all gone!

The Celica Build

Feedback

If I buy something from you, DO NOT USE FEDEX!

Link to comment
Share on other sites

^ Agreed... you have 82.5 sq inch of port area. Doing some quick math by the box dimensions and how long that port looks, it seems to be tuned to the mid to higher 20s, with less that 12 sq inch of port per cube. I would definitely take a look at doing another box. Sub is enormoussss :trippy:

7w1lnOR.jpg

2004 Bagged Trailblazer

(4)18" Sundown Nsv3s
(4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4
(2)DC power SP 270s, (14)XS Power d3100s, (1)d6500

 

Link to comment
Share on other sites

Well I got box specs from tone deaf but I'm always willing to try new stuff to get louder it was the first 18 we have done and yea I am new to car audio :P I appreciate the feedback and I'll look into a box from ram design thanks guys :)

98 Jeep Cherokee XJ 2 DOOR

1 18" T3 TSNS

DC 5.0K

Mechman 270 Unit

XS Power Flex 0 gauge

XS power D1400 under hood

3 Yellow tops in rear

1990 BMW e30 325i (drift car)

system to come

T3_468x60.gifDCSig.jpg

Link to comment
Share on other sites

That woofer is sexyyyyyyy

NEW

2011 Chevrolet Silverado LTZ

2 XS Power D3400

Kicker HyperFlex 1/0

Soundstream Vir 7870bt

OLD

2010 Jeep Patriot

2 Murdered Out Black DC LVL 4 15s With XL Recones(with 1 extra spider pack a piece)

1 Crescendo BC 3500

1 MB Quart 60.4

1 Set RF T1 6x9s Up Front

1 XS Power D3400(Front)

1 XS Power D3400(Back)

2 runs of 1/0 Kicker Hyperflex

SoundStream Vir 7870bt

Fat Mat Rattle Trap Xtreme

[www.youtube.com/tntravelers33]

FEEDBACK

Link to comment
Share on other sites

personally i would go small box big port. around 5cubes after displacements tuned in the 32 region. If your tuned in the 35 area it should still play the lower notes well. unless its like a 20hz sine wave haha.

2010 Silverado

18" DC XL 18

DC 2k

XS Power Batts

 

Link to comment
Share on other sites

I kinda wish I woulda went with 18s right away when I ordered my pair TSNS. Looks like a promising start.

DC SOUND LAB NUT HUGGER

Currently Own
4 - 18" lvl 6s (m3) w/full Carbon Fiber option

2 - DC 5k

lvl 4 motor

lvl 2 motor

On 8/2/2013 at 8:13 PM, n8ball2013 said:

this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick.

Link to comment
Share on other sites

Sooner or later (preferably sooner) you might wanna take another whack at that box. Yeah, you've got some great equipment and its nice you attempted box building. But that box is not so nice, and I bet tuning is way off. Not to mention you could easily get enough airspace for one 18 to get it under the window line and give the port some real room between it and the hatch. I'm just saying, you are clearly a noob with great equipment, and if the equipment doesn't live up to your expectations, don't sell it (like a lot of noobs do). Most likely you just need to rebuild a proper box. I mean that in the nicest way possible, you can always get a design from RAMdesigns or Ray or whoever else is doing quality sketchup designs. Anyway, keep the thread updated.

Also, how do you plan to run a Sundown 4500 at 1 ohm with a D1 sub?

its a dual 2

98 Jeep Cherokee XJ 2 DOOR

1 18" T3 TSNS

DC 5.0K

Mechman 270 Unit

XS Power Flex 0 gauge

XS power D1400 under hood

3 Yellow tops in rear

1990 BMW e30 325i (drift car)

system to come

T3_468x60.gifDCSig.jpg

Link to comment
Share on other sites

I would take up the full width of the blazer though and do 38" gain a lil cubic

honestly we worked around max demnsions the width and length fit well so i can have my back seats up for the mean time

98 Jeep Cherokee XJ 2 DOOR

1 18" T3 TSNS

DC 5.0K

Mechman 270 Unit

XS Power Flex 0 gauge

XS power D1400 under hood

3 Yellow tops in rear

1990 BMW e30 325i (drift car)

system to come

T3_468x60.gifDCSig.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1109 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...