01VWGREENMACHINE Posted November 10, 2011 Report Share Posted November 10, 2011 im having an issue connecting 3 1/0 ring terminals to my batt. i have 3 for negative and 3 for positive. so im looking for another way to hook them up that looks good any ideas would be awesome thanks!!!!! Quote http://www.stevemead...f-system-build/ 2001 VW GTI with a 1.8T motor BIG 3 Pioneer AVH-4200DVD DOUBLE DIN HEAD UNIT 6 - 4 VOLT PREOUTS RF T1500-BDCP (running at 2 ohm) RF T400.4 RF T1 D212 x2 (in ported box) RF 1/0 TO 4 GAUGE distribution block x 2 all stinger wires 200a alternator (SINGER ALT) RF T2652-S (6.5 MID BASS AND 1" TWEETS in front and rear) KINETIC HC 800 BATTERY (Front) KINETIC HC 1200 BATTERY (BACK) 120ft of 1/0 stinger blue and clear matt 20ft of 4 gauge stinger blue and clear matt 30ft of 8 gauge stinger blue and clear matt 100ft of 12 gauge stinger speaker wire black Link to comment Share on other sites More sharing options...
LoudBimmer Posted November 10, 2011 Report Share Posted November 10, 2011 busbar Quote Link to comment Share on other sites More sharing options...
AA98hoe Posted November 10, 2011 Report Share Posted November 10, 2011 Aluminum or copper flats stock I use 2 1/2 in by 3/8 by 5in then dill holes for battery post bolt then multiple hole usually 6 with 5/16 by 1 1/2 bolts washers and nuts Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
01VWGREENMACHINE Posted November 10, 2011 Author Report Share Posted November 10, 2011 where can i get something like that? Quote http://www.stevemead...f-system-build/ 2001 VW GTI with a 1.8T motor BIG 3 Pioneer AVH-4200DVD DOUBLE DIN HEAD UNIT 6 - 4 VOLT PREOUTS RF T1500-BDCP (running at 2 ohm) RF T400.4 RF T1 D212 x2 (in ported box) RF 1/0 TO 4 GAUGE distribution block x 2 all stinger wires 200a alternator (SINGER ALT) RF T2652-S (6.5 MID BASS AND 1" TWEETS in front and rear) KINETIC HC 800 BATTERY (Front) KINETIC HC 1200 BATTERY (BACK) 120ft of 1/0 stinger blue and clear matt 20ft of 4 gauge stinger blue and clear matt 30ft of 8 gauge stinger blue and clear matt 100ft of 12 gauge stinger speaker wire black Link to comment Share on other sites More sharing options...
Blackedout Posted November 10, 2011 Report Share Posted November 10, 2011 You can reorganize your runs. Run a run off the alternator. Run a negative run off the run at the frame (that completes the big 3). Bus bars are nice but 6 runs isn't that big of a deal... There's definitely more than one way to go about it. Quote Trunk Build Log Link to comment Share on other sites More sharing options...
LoudBimmer Posted November 10, 2011 Report Share Posted November 10, 2011 toolmaker, check him on caco Quote Link to comment Share on other sites More sharing options...
KnockinthaStreetzof608 Posted November 10, 2011 Report Share Posted November 10, 2011 toolmaker, check him on caco why if you dont want it to be pretty you make it yourself go to ace hardware or menards and have a drill press and make your own holes it works just fine and saves you alot of money Quote CAR -2005 Ford Mustang (Legand Lime) H/U -Pioneer avh 3200dvd Amps 2 AQ 3500d.1s strapped 1ohm daily .25burps 1Sundown Audio 100.4 1 Sundown Audio 125.2 Subs 4 AQ HDC'4s 12's Mids and highs 4 Sundown Neo Pro 8s 2 AQ Super Tweeters Electronical Mechman 270 unit 1 D3400 2 D3100's WALLED! Link to comment Share on other sites More sharing options...
01VWGREENMACHINE Posted November 10, 2011 Author Report Share Posted November 10, 2011 no drill press or i would have made my own distribution blocks and been done with it Quote http://www.stevemead...f-system-build/ 2001 VW GTI with a 1.8T motor BIG 3 Pioneer AVH-4200DVD DOUBLE DIN HEAD UNIT 6 - 4 VOLT PREOUTS RF T1500-BDCP (running at 2 ohm) RF T400.4 RF T1 D212 x2 (in ported box) RF 1/0 TO 4 GAUGE distribution block x 2 all stinger wires 200a alternator (SINGER ALT) RF T2652-S (6.5 MID BASS AND 1" TWEETS in front and rear) KINETIC HC 800 BATTERY (Front) KINETIC HC 1200 BATTERY (BACK) 120ft of 1/0 stinger blue and clear matt 20ft of 4 gauge stinger blue and clear matt 30ft of 8 gauge stinger blue and clear matt 100ft of 12 gauge stinger speaker wire black Link to comment Share on other sites More sharing options...
KnockinthaStreetzof608 Posted November 10, 2011 Report Share Posted November 10, 2011 no drill press or i would have made my own distribution blocks and been done with it or that Quote CAR -2005 Ford Mustang (Legand Lime) H/U -Pioneer avh 3200dvd Amps 2 AQ 3500d.1s strapped 1ohm daily .25burps 1Sundown Audio 100.4 1 Sundown Audio 125.2 Subs 4 AQ HDC'4s 12's Mids and highs 4 Sundown Neo Pro 8s 2 AQ Super Tweeters Electronical Mechman 270 unit 1 D3400 2 D3100's WALLED! Link to comment Share on other sites More sharing options...
KenC210 Posted November 10, 2011 Report Share Posted November 10, 2011 Is there anything wrong with the way you have them, or just want them to look clean? Just curious cuz thats how mine look but i got 4 runs temporally, wanted the system to play already. Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.