Twostrokeking Posted September 17, 2012 Author Report Posted September 17, 2012 You ain't no Damn taxi! Rip those seats out and run some sa15s back there! To be honest I would LOVE to. Problem is then I need an alt. Batteries. 0 gauge. New amps and the subs. Lol so expensive. It all comes with time though. Ill get there . My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio
TRTC360 Posted September 17, 2012 Report Posted September 17, 2012 You ain't no Damn taxi! Rip those seats out and run some sa15s back there! To be honest I would LOVE to. Problem is then I need an alt. Batteries. 0 gauge. New amps and the subs. Lol so expensive. It all comes with time though. Ill get there . aren't you running a rockford 1500 watt amp? or is it a 1000? either way build the box accordingly and a pair of sa-15's should get down in that truck. '93 Firebird Formula V8 H/U- Kenwood eXcelon KDC-X395 Mids/Highs Amp- Hifonics ZXI80.4 Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0 G34 Red Top and a 180amp Ford Alternator www.youtube.com/TRTC360
Witney181 Posted September 17, 2012 Report Posted September 17, 2012 Sweet bro!!! Gunna do anything about the sunroof rattling? Maybe some weather stripping? Vote for October SOTM. Witney181 http://www.stevemeadedesigns.com/board/topic/154187-october-2012-sotm-vote-sponsored-by-sonic-electronix/ Kenwood hu-KDC-3525 Power bass 6x9 Powerbass 6.75 Powerbass 1" silk dome tweets Ssl ev 4.400 (all 8awg speaker wire) soundstream rub1.1600d at 1ohm (2) alpine type r 12d4 2012 Custom 3 cube box tuned to 33hz. Trunk wall 170a load boss alt, big 3 in tsunami OFC 0awg 1 run 0awg to rear power max 98ah batt POS no name brand voltmeter Blue LED Fog LIghts 16" eagle alloy rims 1 far from mint condish 1999 Honda Accord :]] FINAL PRODUCT OF THE SILVER BULLET----> http://www.stevemead...rd-trunk-build/ Youtube------> http://www.youtube.c...ersteinfourlife
Witney181 Posted September 17, 2012 Report Posted September 17, 2012 I think you just say fuck it and wall that bish!!!!! Vote for October SOTM. Witney181 http://www.stevemeadedesigns.com/board/topic/154187-october-2012-sotm-vote-sponsored-by-sonic-electronix/ Kenwood hu-KDC-3525 Power bass 6x9 Powerbass 6.75 Powerbass 1" silk dome tweets Ssl ev 4.400 (all 8awg speaker wire) soundstream rub1.1600d at 1ohm (2) alpine type r 12d4 2012 Custom 3 cube box tuned to 33hz. Trunk wall 170a load boss alt, big 3 in tsunami OFC 0awg 1 run 0awg to rear power max 98ah batt POS no name brand voltmeter Blue LED Fog LIghts 16" eagle alloy rims 1 far from mint condish 1999 Honda Accord :]] FINAL PRODUCT OF THE SILVER BULLET----> http://www.stevemead...rd-trunk-build/ Youtube------> http://www.youtube.c...ersteinfourlife
Twostrokeking Posted September 23, 2012 Author Report Posted September 23, 2012 Okay a few things have happened! My trailer plug on my truck quit working witch means that the light up chevy emblem quick working also. Turns out it was full of mud and corroded. It was a 7 plug and then I had to use an adapter to run the 4 plug that the light up chevy emblem uses. I decided since I never pull a trailer that needs the 7 plug i replaced it with a four plug. its a lot cleaner and less bulky. Here is the install pics! I cleaned it up so nice. Ill get cleaned up pics tomorrow when its light. The idiot who owned this truck before me seriously sucked at wiring. Any wiring that was done after market by the dumb ass I have had to re do. All is good now i think. I mean look at this mess. and that is after i cut the 7 plug out. But it looks bitchin now. I LOVE clean wiring. As a side note that other bass head I met in my city gave me like 3 ft. of 0 gauge audio pipe wire. I get wicked voltage drop and he says this should help pretty good. Even tho I have already done the big 3 I will run this from the pos on alt to pos on batt and then from bat to fender wall. (: pics tomorrow! My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio
bigmescan Posted September 23, 2012 Report Posted September 23, 2012 looks good bro. im really wanting 2 more as well. SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74
Twostrokeking Posted September 24, 2012 Author Report Posted September 24, 2012 Alright well ill start with the finishing product of the trailer harness. Everything I DO PERSONALLY is soldered. I don't like crimping shit. So this new harness is soldered on and heat shrunk. then completely wrapped in black 3m electrical tape and then the loom is put over it. I need to do undercoat again bad. Rust=ugly. Went to the local hardware store last night and bought 4 0 gauge battery lugs. Forgot to take soldered pics but here are the wires. Soldered and then wrapped in 3m electrical tape. (Ignore my ugly ass feet) Red wires are the new ones. There is a wire from the positive on the alternator to the positive on the battery. Then a ground from the negative on the battery to the fender well. I sanded the paint off the fender well and then repainted it to prevent corrosion and so it looks better. Here is the bolt I used through the gender coming out the bottom. Super blurry but its also painted. I dont know how to rotate the picture on photo bucket. Anyways 14.7 is great. I am so stoked with how much this helped!! My stock voltage meter on the gauge cluster barely moves with the bass. Before I could get it to jump around like crazy. I love it. Now i dont need an alt near as bad (: ON SECOND THOUGHT. That kid who gave me the 0 gauge also gave me an infinity kappa mid and 2 jvc tweets so now I have the infinity and the kenwood for mids and the jvc's for the tweets. They are still being ran off the kenwood cross overs. It sounds soooo much better to have speakers in the drivers side. I didn't take pics cause i forgot but it sounds amazing. Definitely better then 1 mid and high. I cant wait until i can do a set in each door and a 4 channel amp! Thanks for looking and vote for me for SOTM! (: My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio
scooter99 Posted September 25, 2012 Report Posted September 25, 2012 Nice! on photobucket, click the picture, go to edit and click it. Then go to the advanced settings button on the bottom left (blue flag looking thing) and click it. Go to the "image" dropdown and then go down to the "Rotate Canvas 90* CCW" (Counter Clock Wise) and click it. Once that's done you have to save it: Control S, then name it if you want to, and then choose your folder you want it in, it will automatically choose the main folder as the default. Then click ok. That's how I've done it. I'm not a big fan of the new PB format on editing. I had just gotten used to the old way and they changed it on me! EFFERS!!! Facebook Page: S99Creations 2006 F250 Lariat Build
Twostrokeking Posted September 25, 2012 Author Report Posted September 25, 2012 Nice! on photobucket, click the picture, go to edit and click it. Then go to the advanced settings button on the bottom left (blue flag looking thing) and click it. Go to the "image" dropdown and then go down to the "Rotate Canvas 90* CCW" (Counter Clock Wise) and click it. Once that's done you have to save it: Control S, then name it if you want to, and then choose your folder you want it in, it will automatically choose the main folder as the default. Then click ok. That's how I've done it. I'm not a big fan of the new PB format on editing. I had just gotten used to the old way and they changed it on me! EFFERS!!! Thanks man Ill do it later haha My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio
HunterJohnson Posted September 25, 2012 Report Posted September 25, 2012 I love crimping small wires like that! So much easier and you can get a water proof seal/heatshrunk with the nice crimps. looks way better with the wire conduct Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
Recommended Posts
Archived
This topic is now archived and is closed to further replies.