roscoe1129 Posted November 26, 2007 Report Posted November 26, 2007 Or could it be the LOC?X2 My thoughts exactly! Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
Chris Posted November 26, 2007 Author Report Posted November 26, 2007 Or could it be the LOC?What is that? 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
roscoe1129 Posted November 26, 2007 Report Posted November 26, 2007 Line Output Converter Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
j_black10 Posted November 26, 2007 Report Posted November 26, 2007 Line Output Converter I just noticed he had one of those! Yeap, that could be the problem too!!! AudioControlRockford FosgateXSPower
Chris Posted November 26, 2007 Author Report Posted November 26, 2007 Could be, but why would it only send the amps into protect when I turn it up? I'll look into it, but it's one with a direct connecttion (no gains of settings) just straight input output. 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
roscoe1129 Posted November 26, 2007 Report Posted November 26, 2007 check to make sure its all intact (wires) and nothings bare...or touching....( yeah I know another thing to look at....) Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
FieroGrande Posted November 26, 2007 Report Posted November 26, 2007 it was just a thought........Looks like there are alot of things that you need to look over and examin.......hope that you solve it!
dmanson Posted November 26, 2007 Report Posted November 26, 2007 you can always get one of your buddies who already have a system to run some RCAs from there H/u to your T10001bds and have him to sort of cut his volumer up and see if it goes into protect. 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
Guest Nismofreak Posted November 27, 2007 Report Posted November 27, 2007 might be the amp... and don't remove the protect circuit...the most retarded thing to do....i have seen many problems in db drag lol
roscoe1129 Posted November 27, 2007 Report Posted November 27, 2007 might be the amp... and don't remove the protect circuit...the most retarded thing to do....i have seen many problems in db drag lolNaw if your safe its all good all of our T4k's have thiers removed and rarely have issues from them except the occasional flame out, but we run ours much lower than 1ohm.... Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
Recommended Posts
Archived
This topic is now archived and is closed to further replies.