If You Want Enclosure Plans Then Here Ya Go!

[hks599]

box for a dc lvl 4 15 sub up/port facing back i want it to hit some loud lows.

thanks

[eurotuner]

Hey guys... I was wondering if I could get some help on a rather complex box (at least for me) I saw this design on the forum a while back but I cant remember who posted it. Here's a few pics of the box.

I'm not really sure how to take the kerf cuts into account to make sure that piece of wood is the proper length also, i'm not really sure what I should tune it to. I listen to mostly rock but i'll put some rap in if I want to bump.

It would be for 2 12's and here's the specs of the subs...

Re 1.3

X-Max (mm) 9.0

SPL 86

Fs (Hz) 27.5

QTS .377

QES .411

QMS 4.604

VAS (L) 44.75

BL ™ 10.705

Thanks for the help! It's going into an 07 audi a4.. i'll get the trunk specs when I get off work in the morning

[itasoldier44]

i have a 2003 dodge ram and i have the 60/40 bench seats in the back, i took the 40 bench seat out and want to put a box there, i want a box for 1 15" or possibly a 18" because i dont think i can fit 2 subs in there unless you could design somthing like that for me

i will post some pics of what i have to work with so you can get a visual of what im explaing, i have 1 15" in there right now and the box demensions are

: 25" high, 28 to 30 long and 22 or so wide, i will re-measure it tomoroww and get some pics

i want the box ported, i wanna go straight SPL

thanks, trent

[bumpin04voy]

type of subs---RE SX 18s

# of subs----4

max dimensions---44x26x36

type of vehicle---gmc envoy

3 or 4 (2x4) bracing

looking to be around 33-35 hz

subs are going to be facing the front of the truck along with the port.

im just trying to see if i can make something work without taking the backseats out.

RE says around 5.5-8 cu ft per sub so see what happens

thanks alot man

[TechSys]

Hey matt, with all the good work you're doing here, I figured I'd throw something in for you to play around with. If you get a chance, that is.

16 PowerBass 3XL-15D subwoofers

Enclosure(s) needs to be tuned to 37hz.

Room to work with is 46" high, 48" wide, and just about any depth needed (89 Chevy Astro), as long as there is room for 8 XA-4000D amplifiers and batteries.

I just want to see what kind of bass race design you could come up with for this. You never know, I may build it as I'm working on a deal right now. We'll see.

[DefQon]

Ive made 2 slot ported sub boxes and not happy with both. I just want an all around sub box preferably slot ported.

for a Earthquake 15" DBXI-15D

I listen to Rap and Hardstyle, Hard trance

max dimensions

Width - 30"

Height - 18"

Depth - 17"

Slot port would be easier for me to make i think.

[Bossmaan]

max dimensions: Not sure Yet, but hoping you could help

-type of subs: Fi Q 12"

-number of subs: 2

desired tuning frequency: 30 Daily Driving

-type of vehicle 2003 Camry

-position of the subs and port Firing towards trunk lid

I'm probably gonna get one of my friends to build it so i will be getting him to brace it, as he made my previous box as well..

Now the problem is I'm looking to do a ported enclosure, which i know might not work. So if possible can i get sealed and ported dimensions of the box. I'm upgrading from a single 12" T1 which is in a 3.0^ft box..thnx!

[ChampN252]

I need a little help. The only thing that has me stomped is the port. Is the port put beside or behind the baffle? And is it an 18" cut or 18" when jointed with the baffle? Hmm...kinda the same question.

[andym85]

im sorry man...i know ive been slacking...just been busy with my car and stuff....i promise i will look at everything and answer everybody's questions tomorrow

[anubis]

i'm making another box but this time for my '03 s10 blazer

my enclsoure plan is 36"Wx36"Hx13"D

with six 3" ports each coming out to be around 7.48"-7.5" long with a 40Hz tuning, is this right?

the site is www.BCAE1.com/spboxnew2.htm

it says the port displacement is 0.184 and i know my subs displacement is a total .4 cubes