If You Want Enclosure Plans Then Here Ya Go!

[BigPimpin91]

side not to all: im not gonna get to any of these until sunday at the earliest...got a competition friday and saturday!

Completely understood.

[HUMBOLDT_knock]

Ya I understand about the turbulance. I too thought that Orion only showed plans for a sealed box however after recieving the speaker and book for it I discovered that they do have plans for a ported box and I don't remember what size it was I wanna say that it was 2.7cf (before displacement) with a single 4 inch round port , or something close to that.

And actually the Qts is .37 on my peticular sub which is the 12.4 model. So maybe this will change things quite a bit. I have found lots of info about the Thiele/small Parameters and what they mean and how to do the equations to figure out how the driver wants to perform so I will educate myself so I can do this on my own later on down the road but I really appreciate all your help and knowledge.

Hey I just checked and the box dimensions they showed ended up being 1.96cf for a ported 12 before displacement

[Jextel]

by any chance you can od a 4th order bandpass? the max specs are 14H 32W 28D i need the port and towards the rear deck like this one

its for 2 audioque 12's on 2 hk401sx's(later down the road 2 2200.1d by audioque) in a 97 nisaan maxima tuned to 35hz

[andym85]

by any chance you can od a 4th order bandpass? the max specs are 14H 32W 28D i need the port and towards the rear deck like this one

its for 2 audioque 12's on 2 hk401sx's(later down the road 2 2200.1d by audioque) in a 97 nisaan maxima tuned to 35hz

that is a really clever setup!!

but im not really confortable with doing 4th order bp yet...i just recently (like a week or so ago) found all of the equations and shit for bandpasses and have been working with them since, so until i get confortable with them im just gonna stick with ported....sorry

[Jcoleman134]

Hey man i have about 34" wide 42" deep 16.5" high to work with.

Type of sub - (1)HDC315

tuned to 32hz

Think you can help me out?

[RatBass1998]

hello!

i got a pretty little LMS Ultra 15 along with a vfl 200.1 in my closet, so roughly 3-3.5k rms

going into a 98 escort wagon, either sub up port back or sub back+port back is fine, or whatever you think would be best

Max dimensions

36" Wide

22" deep leaves 4-5" from hatch for port to breathe

height is not very limited but if its below 17 cool, it would go under a tarp but dont design around this

i sent you a pm before i found this so sorry for the pm

Thanks Matt

bumping for you to see dimensions if your not too busy

[andym85]

i got everyone's copied down...i will probably sit down and work on them tonight...

[andym85]

crazyforhertz

sorry its taking so long for yours, but how many do u want, 3 or 4?

ratbass1998

bippimpin91

jcoleman134

sick96vtecaccord

have you tried looking at their site? b/c they have specs and cut lists on there

http://www.mtx.com/caraudio/products/manua...nstall/subs.cfm

ducttap123

thats pretty much what i get....i get 1.85cubes tuned at 37.2hz...so we are pretty damn close to one another

amalan

[Amalan]

sweet thanks bro!

[Amalan]

actually bro dont mean to be a prude but do you think you could get me a cut list down? im not sure what the measurements of the port are. btw i tossed you some change for your help, thanks again.