wiring kit question

[loudNlow87]

This is how it should look if you have a front and rear output on your HU.

[pa-pa-platypus]

one think you may have to do is buy a short wire of the wire your 4 channel takes...no sense in trying to shove wire in there thats way bigger than what it accepts

[Freshman6969]

sigh, your going to 5000000 things at once, first off, as stated, you need a front/rear out put on the headunit in order for the 4 channel to work properly ( the front/rear output would hook up to the 4channel, the remaining(sub output) would be going to the sub amp) now for your power wire, use a distrobition block to SPLIT the power wire into 2, one goes to the sub amp, the other goes to the 4 channel, for your remote, just have the one coming off your headunit into the sub amp, then take a smallwire put it with that remote wire, then put the other end into the 4 channel amp, as for the ground, just ground to the same spot as you grounded your sub amp

think i covered all of it, any other questions feel free to pm me

Edited December 6, 2011 by Freshman6969

[MrSkippyJ]

Just run a 4g from your back battery(ies) to the 4 channel. simple enough.