Box fo two XL 15's

[SouthDakota]

Would six cubic feet be good, or do i need to go bigger?

Edited December 29, 2011 by SouthDakota

[will77530]

what kind of power?

[Sheena]

6 cu is fine, just make sure you have the proper port area 13-15 sq in per foot

[SouthDakota]

what kind of power?

probally 3k rms

[SouthDakota]

6 cu is fine, just make sure you have the proper port area 13-15 sq in per foot

Alright thanks man

[Sheena]

you might want to double check with some of the more experienced guys such as ram_designs or 412 CVX..

but i really think you should be fine with like 6 cu ft

[SouthDakota]

you might want to double check with some of the more experienced guys such as ram_designs or 412 CVX..

but i really think you should be fine with like 6 cu ft

alright thanks man i will do that

[CJ18]

3ft3 net per sub will be fine if you have a legit 3000w of clamped power. If you are running a random 3k amP per sub at 1 ohm then you will not get 3k per sub.

If you are planning on 1500w per sub then something along the lines of 3.75-4ft3 net per sub would be preferable.

[Traks]

If you look at the specs for an xl and if you run around 13" of port you will probably get port noise. DC's like big ports from what I have seen over the years.

DC's and small ports is like having a Mustang with a 4cyl........

Edited December 29, 2011 by Traks