lagexe Posted January 3, 2012 Report Share Posted January 3, 2012 (edited) This is my first box and I found one I really like. However, I don't know if my sub will feel the same way. What do you guys think? too much, or is it okay to use? Showed pic Edited January 3, 2012 by lagexe Quote Link to comment Share on other sites More sharing options...
TRTC360 Posted January 3, 2012 Report Share Posted January 3, 2012 it all depends on the power you plan on pushing to the sub. Quote '93 Firebird Formula V8 H/U- Kenwood eXcelon KDC-X395 Mids/Highs Amp- Hifonics ZXI80.4 Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0 G34 Red Top and a 180amp Ford Alternator www.youtube.com/TRTC360 Link to comment Share on other sites More sharing options...
OrionStang Posted January 3, 2012 Report Share Posted January 3, 2012 I wouldn't do 6 cubes for a single 15. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
fmedina Posted January 3, 2012 Report Share Posted January 3, 2012 (edited) the net volume after all displacements would be about 3.8 if i did it right. but the port area is a lil small. if you want some help on a box design shoot me a pm. Edited January 3, 2012 by fmedina Quote Link to comment Share on other sites More sharing options...
fmedina Posted January 3, 2012 Report Share Posted January 3, 2012 it all depends on the power you plan on pushing to the sub. x2.. what amp you using at what ohm load? Quote Link to comment Share on other sites More sharing options...
lagexe Posted January 3, 2012 Author Report Share Posted January 3, 2012 it all depends on the power you plan on pushing to the sub. I have an MB1.1500D I wouldn't do 6 cubes for a single 15. Do you know of a box similar with a better Cube count? This is my first box, and I would really, REALLY like for it to look like this. I know I'm asking a good bit, sorry. Quote Link to comment Share on other sites More sharing options...
lagexe Posted January 3, 2012 Author Report Share Posted January 3, 2012 it all depends on the power you plan on pushing to the sub. x2.. what amp you using at what ohm load? Bout to send you a PM, but I'm MB-1.1500D 2ohm. (1ohm per VC) Quote Link to comment Share on other sites More sharing options...
OrionStang Posted January 3, 2012 Report Share Posted January 3, 2012 What are your max dimensions to work with? Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
fmedina Posted January 3, 2012 Report Share Posted January 3, 2012 (edited) it all depends on the power you plan on pushing to the sub. x2.. what amp you using at what ohm load? Bout to send you a PM, but I'm MB-1.1500D 2ohm. (1ohm per VC) mb quart? ONX or Q.. and id wire it to 1ohm not 2. but if you already got the sub i guess thats what youre stuck with. Edited January 3, 2012 by fmedina Quote Link to comment Share on other sites More sharing options...
lagexe Posted January 3, 2012 Author Report Share Posted January 3, 2012 What are your max dimensions to work with? 3' left-right 2' from top of back seat to back door. (that leaves about 2" for the ports to get air). Height is not a concern, as one that did hit the roof would be bigger than 6cubes. Also, I will not be at all upset if it obstructs my view. I was thinking about a back up cam anyway. mb quart? ONX or Q ONX Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.