pimpnFosgates Posted January 9, 2012 Report Posted January 9, 2012 so i have the part of my trunkthat im going to make a mold of, so i can turn it into a sub box. what i need to know is ,is the masking tape enough so the resin doesnt stick to my trunk or is there something i have to lay down to keep it from sticking to my trunk. Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
MrSkippyJ Posted January 9, 2012 Report Posted January 9, 2012 masking tape would be a bitch to get out. use some aluminum foil. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
ChrisLun Posted January 9, 2012 Report Posted January 9, 2012 I use masking tape first, then I smooth aluminum foil on top, 2006 Dodge Charger (2) Kinetic 3800 (1) DC Power 270XP (4) T1-12D4 (1) T2500BDCP (2) T400.4 7.5 cubic ft. (2) 6 in ports thru the rear deck (2) T165.2 (2) T169.3
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 its all metal, no carpet. so would it be enough?and if so i should go aluminum foil? heres what it looks like right now, is it ggod? Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 theres card board behind the masking tape on the back n left side to keep shape Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
ChrisLun Posted January 9, 2012 Report Posted January 9, 2012 Foil it, then wax the foil.... 2006 Dodge Charger (2) Kinetic 3800 (1) DC Power 270XP (4) T1-12D4 (1) T2500BDCP (2) T400.4 7.5 cubic ft. (2) 6 in ports thru the rear deck (2) T165.2 (2) T169.3
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 wax it with wat? Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
Audio-Concepts Posted January 9, 2012 Report Posted January 9, 2012 You can lay down foil on that, and then either use wax, or WD40, coat the foil, then lightly spray trim glue, lay matting, and then resin. Use about 2-3 layers of matting, let cure completely, the pull the mold, foil and mold should come out nice and easy! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring
Audio-Concepts Posted January 9, 2012 Report Posted January 9, 2012 wax it with wat? Spray or paste wax, like you would use to wax your car! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 ok.seems simple enough. now wats trim glue?spray adhesive? Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
Recommended Posts