blackandgoldl69 Posted January 10, 2012 Report Posted January 10, 2012 i have a dual 4 ohm audiopipe tsvr-15 and a ap-15001d i wanna run this sub at 1 ohm. how big of a box would you guys say i need for this sub to sound good? right now i have it in a 2 cube box. and it sounds horrible have the big 3 done a run of 0 guage wire from the battery to the amp and im getting ready to add an xs power battery.
SnowDrifter Posted January 10, 2012 Report Posted January 10, 2012 You can't run a d4 sub at 1 ohm... It's just not possible For an enclosure: I would guess somewhere in the 3.75 cuft range @~35hz for ported ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
blackandgoldl69 Posted January 10, 2012 Author Report Posted January 10, 2012 lol my mind went blank for a second i was thinking if i was running 2 it would be a 1 ohm load but i figure i only have enough room for one.
Joe X Posted January 10, 2012 Report Posted January 10, 2012 All in the manual actually they recommend a 17 x 17 x 16 ported enclosure. http://www.audiopipe.com/support/manuals/files/TS-VR%20manual%20layout%20E.pdf You have it boxed somewhat tight but there are far better sounding subs also, keep in mind that.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.