Best Aero's in your opinion?

[MaliBOOM]

I have always heard good things about these

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-354

But didn't know if there were others people suggest

[MaliBOOM]

Another thread referred me to Team Sundown Derrick as someone to get a hold of for Aeros?

[ALPINE408]

those are precision ports not areos the areo's have been out of bussiness for some time now and did move 20% more air then the pp ports but you can't find them anymore

pp ports from parts express is the only ones i know of that are manufactured for buying from a company all otheres are hand made by someone not a comapny

[SQMonte]

Precision Port FTW. Derrick will save u a few bucks though.

[MaliBOOM]

Precision Port FTW. Derrick will save u a few bucks though.

Ya I am going to try and see what he can do for meh

[I am Poncho]

if your not afraid of investing a little time you can always make your own, out of sono-tube a few circle rings and a round-over bit for a router, some glue. and if your worried about strength a little fiberglass resin on the outside of the tube. you can make in any size you want. most ive seen down look and work out pretty damn well.. i dont think there is a sticky or even any thread ive seen where some goes threw it step by step. maybe if i get really bored ill throw up a how to thread.

but really its pretty simple. IMO

[Phrostbyte0311]

Presicion Ports are the best that I have personally used, but a lot of peeps build their own.

[bassrace]

if your not afraid of investing a little time you can always make your own, out of sono-tube a few circle rings and a round-over bit for a router, some glue. and if your worried about strength a little fiberglass resin on the outside of the tube. you can make in any size you want. most ive seen down look and work out pretty damn well.. i dont think there is a sticky or even any thread ive seen where some goes threw it step by step. maybe if i get really bored ill throw up a how to thread.

but really its pretty simple. IMO

Sorry for the thread jack but..

I'd like to see the how to if you have time...

I've flared pvc but never made flared ends for concrete former tube, I was thinking of doing it with glass but I'm curious to see how you do it.