dolarbilz Posted January 17, 2012 Report Posted January 17, 2012 What does inside crossover look like any jumpers are anything Quote
C-Fizzy Posted January 17, 2012 Author Report Posted January 17, 2012 I'll get a picture for you dolar. One sec. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
JustinWilson Posted January 17, 2012 Report Posted January 17, 2012 With my newer T1 comps it was that if you were doing a single amp then you put the input from amp into the mid input and the outputs to each corresponding output source. You would use both inputs if you wanted to do a bi-amp setup and utilize the calibrated crossover. Quote 06 GP GXP Google Nexus 7 16gb Rockford Fosgate 3SIXTY.3 *Electrical* DC Power 320a HP 2 - Juicebox Bananas g31 Stinger SPP2250 rear Kinetik HC1800 side of wall Optima Red Top front Monster Cable 1/0, 2 runs to rear Monster Cable 1/0 Big 3 2-Rockford Fosgate T1652S's Rockford Fosgate T400-4 Rockford Fosgate T40001bd (4693rms @1ohm) 4-Sundown SA-15 D2's wired @ 1ohm/These are on the way out for 4 one off Eminent Audio 15's 15.2 cubes net tuned @34hz! Walled off DBdrag official 151.6db @46hz GXP Build log!:GP GXP Walled Quality is the sign of a true enthusiast! Refs: Link to leave more: http://www.stevemead...91#entry1603091 Bought from: Trippi (RF T2500bd, T1000-4),bre2ts (25ft Knu 1/0) Sold to: shmew22 (T1500bdCP), Rev. Wrath (RF 3SIXTY.1), trjohnst (Knu 1/0, 3 fuse holders), Enemyofsilence (Audio Technix, RF T400-4).
C-Fizzy Posted January 17, 2012 Author Report Posted January 17, 2012 Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
Nine8SST Posted January 17, 2012 Report Posted January 17, 2012 I have the newer ones, but there is an internal selectable switch. If youre using one channel input on each you use the woofer input. Quote 1998 SS/T Ram Build Log - Kenwood KVT-514 and KNA-G510 Navigation - 2 DC Level 3 12" - Components??? - Sundown ??? - Sundown??? - Knu Konceptz - Second Skin Dampy Pro - XS D6500
C-Fizzy Posted January 17, 2012 Author Report Posted January 17, 2012 I'll be wiring one 6.5 and one 5.25 along with their respective tweeters to 1 channel on my punch 400.2. For a final load of 2 ohms on each channel. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
Nine8SST Posted January 17, 2012 Report Posted January 17, 2012 Just looked in the manual for yours, there is no biamp switch, you just input to the "mid" slot, unless you want to biamp, then use both. Quote 1998 SS/T Ram Build Log - Kenwood KVT-514 and KNA-G510 Navigation - 2 DC Level 3 12" - Components??? - Sundown ??? - Sundown??? - Knu Konceptz - Second Skin Dampy Pro - XS D6500
Nine8SST Posted January 17, 2012 Report Posted January 17, 2012 I'll be wiring one 6.5 and one 5.25 along with their respective tweeters to 1 channel on my punch 400.2. For a final load of 2 ohms on each channel. Thats perfect....just use the "mid" inputs and 2ohms will be your final impedance. Quote 1998 SS/T Ram Build Log - Kenwood KVT-514 and KNA-G510 Navigation - 2 DC Level 3 12" - Components??? - Sundown ??? - Sundown??? - Knu Konceptz - Second Skin Dampy Pro - XS D6500
jakobebassbudds Posted January 17, 2012 Report Posted January 17, 2012 my speakers Quote 2 12ks and i dont know what to do build in the works!
C-Fizzy Posted January 17, 2012 Author Report Posted January 17, 2012 Thanks for the help everyone. I appreciate it! Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.