CFAIST Posted January 23, 2012 Report Share Posted January 23, 2012 Does anyone have any experience with these? Or the line. I used to run The old SPL's SPL160s and the Rubi 1002. Did very well with them. I know epsilon owns them now. Do they do rated, Efficient, Will they run at .67 or .5 Ohm? any and all help is appreciated. Price wise and Numbers they look good but after Carrying and running American Bass and Power bass Amplifiers it's kinda hard to deviate. C.A.R. AUDIO Faist Audio Concepts F.A.C. 96 Escort wagon Murdered out (redneck style) Eclipse HU, CDT classic Components ED Nine.2, Hifonics 1608d (borrowed) 2 Powerbass M 15"s 6 cubes tuned to 30 hz 2005 State record holder 0-600 Consumer 143.7 USACi Kick (1 Soundstream SPL15, JL e1200) 2009 3rd Loudest 0-1000 Trunk In Iowa USACi 145.00 kick. (4 Powerbass PS-10's US AMPS MD3D) 146.2db Unofficial. 6-ps-10's MD3D. Personal best 150.9DB 4 Powerbass M-15Ds. American Bass VFL150.1 at .5 ohm 2010 Usaci 0-1000 mod Iowa state record holder 149.4DB Check out my youtube channel CFAIST1 Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted January 23, 2012 Report Share Posted January 23, 2012 Does anyone have any experience with these? Or the line. I used to run The old SPL's SPL160s and the Rubi 1002. Did very well with them. I know epsilon owns them now. Do they do rated, Efficient, Will they run at .67 or .5 Ohm? any and all help is appreciated. Price wise and Numbers they look good but after Carrying and running American Bass and Power bass Amplifiers it's kinda hard to deviate. why? just get the right coil config and run at 1 ohm. if you are running american bass/powerbass, you would pretty much be downgrading going to the rubicon. The older rubicon was amazing, but as far as the rub2500, im not sure on the quality, but im pretty sure they do rated at 14.4v Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
IBleedMusick Posted January 23, 2012 Report Share Posted January 23, 2012 I have one in my Tahoe never clamped it but it is definitely doing rated or close to it a very solid and reliable amp. Mounted under my rear bench seats and never gets hot, I have been pretty happy with it thus far. It is currently running at 1 ohm on 1 15" CVX after I sold my 2 L7's unfortunately I don' have the electrical to attempt .5 ohm and I really wouldn't stress the amp out like that to begin with. 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
CFAIST Posted January 23, 2012 Author Report Share Posted January 23, 2012 Chevyboy95, the .67 Ohm I was thinking of doing 3 d4 15's in my explorer sport to fight the box rise and to do something different. Only good reason I was considereing it was cost. I'm an American Bass, Powerbass, DC, and PPI dealer and I can't even buy anything in that realm of power for under $430.00. Just wanted to do a fun budjet beater system for my daily driver. C.A.R. AUDIO Faist Audio Concepts F.A.C. 96 Escort wagon Murdered out (redneck style) Eclipse HU, CDT classic Components ED Nine.2, Hifonics 1608d (borrowed) 2 Powerbass M 15"s 6 cubes tuned to 30 hz 2005 State record holder 0-600 Consumer 143.7 USACi Kick (1 Soundstream SPL15, JL e1200) 2009 3rd Loudest 0-1000 Trunk In Iowa USACi 145.00 kick. (4 Powerbass PS-10's US AMPS MD3D) 146.2db Unofficial. 6-ps-10's MD3D. Personal best 150.9DB 4 Powerbass M-15Ds. American Bass VFL150.1 at .5 ohm 2010 Usaci 0-1000 mod Iowa state record holder 149.4DB Check out my youtube channel CFAIST1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.