Relyks Posted January 28, 2012 Report Posted January 28, 2012 2-AudioQue SD 2.5 12" Subs on 1200.1D 600watts rms 1200 peak at 1 ohm in 5 cu.ft ported at 36hz roughly port all the way on the left side port and subs fired to the rear subs sharing air. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12
CaPRiCEx383 Posted January 28, 2012 Report Posted January 28, 2012 (edited) Need more port, Common port should be 3, Try to shrink it down a little too, Somewhere around 4 to 4.5ft would work well. Edited January 28, 2012 by CaPRiCEx383 Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion
Relyks Posted January 28, 2012 Author Report Posted January 28, 2012 no way going less air space port will just have to be worked with AudioQue like a lot of air and ken at audioque recommended 5.00cu.ft and everybody told me that i should give them more so. help me work with the port needs more or less port? Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12
pa-pa-platypus Posted January 28, 2012 Report Posted January 28, 2012 needs more port... and whats ur plans for bracing? and the common port walls like said before.. and i would think two would displace more than .09 lol Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
bassrace Posted January 28, 2012 Report Posted January 28, 2012 I'd say around 4-4.5 net about 14-17 sq in of port per cube. And those woofers displace more than .09. Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
Relyks Posted January 28, 2012 Author Report Posted January 28, 2012 its .18 with 2 sorry its a .09 cu.ft difference. its going to be double baffle maybe a tie rod in middle but its not so much power that it need anything special like resin or support. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12
Relyks Posted January 28, 2012 Author Report Posted January 28, 2012 no 1 AudioQue SD 2.5 woofer has .09 displacement. and 4.cu.ft is to small last time i am going to say AQ Subs like alot of air and perform better on a lot of air. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12
CaPRiCEx383 Posted January 28, 2012 Report Posted January 28, 2012 (edited) Alright just try working on the port keeping the dimensions the same, Try a wider port until you get within the 12-14 range at least. So try like 4.5, then 5 then 5.5 and so on until you get in the range and then adjust length to what u want. Edited January 28, 2012 by CaPRiCEx383 Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion
bassrace Posted January 28, 2012 Report Posted January 28, 2012 no 1 AudioQue SD 2.5 woofer has .09 displacement. and 4.cu.ft is to small last time i am going to say AQ Subs like alot of air and perform better on a lot of air. Did you have the AQ 1200 last time? Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
CaPRiCEx383 Posted January 28, 2012 Report Posted January 28, 2012 ok, you need to put .18 in the displacement, 3 common port walls, 1 in the extra baffle, and way more port Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.