Ludachris5150 Posted January 28, 2012 Report Posted January 28, 2012 I know that I would need a + run from the front to back battery and then + from the back to the amplifier. But is it necessary to have a negative run from the front to back? or can I just ground the 2nd battery to the frame or something? Rebuild in progress...
carshateme Posted January 28, 2012 Report Posted January 28, 2012 You can do it on your frame as long as it's clean, shiny metal. Just take a grinder and grind the paint off to where you want to ground your battery too. I do it with all my electrical parts in my car. Although it's recommended by mechanics to run the ground back to the battery....but it's not required. To save money and such...everything is grounded to the frame. *tails lights, blah blah blah* New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
gredysra Posted January 28, 2012 Report Posted January 28, 2012 if u got the money run both + and - back but if u dont just it to strut tower or frame. the frame is better and then just hook up the amp to battery 89 Ford Bronco 2 6 DC XL M2 12's 1 DC 9K Dual Singer Alts 7 Xs D3100s & 1 D6500 All Audio Techinx OFC 1/0 Doing 55s at 26hz!!!
sprkn_ranger Posted January 28, 2012 Report Posted January 28, 2012 You can just ground to the frame, just make sure the spot you ground to is sanded down to bare metal. Have you done the big 3 yet? Edit-Damn, triple ninja Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/
Ludachris5150 Posted January 28, 2012 Author Report Posted January 28, 2012 Its for my brothers stereo, And I dont think he wants to $100 on wire so that is why I was asking. Thanks for all the input everybody. Always get good answers on SMD Rebuild in progress...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.