Chrysler200s Posted January 28, 2012 Report Posted January 28, 2012 I'm going to be running 2 sets of T2 6.5" components. I was planning to run them off of one T400 2channel but I was wondering what would be the advantages/disadvantages if I run two amps..one for tweeters and one for the mids. Also, if I do run two amps would I want two 4 channel amps or two 2 channel amps? 2011 Chrysler 200 S (Black on Black on Black w/ black trim) Changing all the time but, for now..... *Coming Soon* 80sq ft. SS Damp Pro (INSTALLED) 36sq ft. SS Luxury Liner (INSTALLED) Big 3 (RF 0 Gauge) All RF power wire, speaker wire, RCA's RF T3 6.5" components (2 sets) have RF T800-4 ad (mids & highs) XS Power D925 XS Power D3400 have still undecided on sub/sub amp
donpablo Posted January 28, 2012 Report Posted January 28, 2012 Are you gonna be running 2 sets of tweets also 2015 F-150 Platnuim
MrSkippyJ Posted January 28, 2012 Report Posted January 28, 2012 if you use 2 amps (or one 4-channel amp) you can use the bi-amp feature of the T2 components or just run active. This would allow you to adjust the level of the tweeters and mis separately and if you run active you can also adjust the x-over points. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
donpablo Posted January 28, 2012 Report Posted January 28, 2012 If you want to stick with rockford i would go with the T600-4 2015 F-150 Platnuim
Chrysler200s Posted January 28, 2012 Author Report Posted January 28, 2012 Are you gonna be running 2 sets of tweets also yes..two sets of the T2 components..4 tweeters..4 6.5" mids 2011 Chrysler 200 S (Black on Black on Black w/ black trim) Changing all the time but, for now..... *Coming Soon* 80sq ft. SS Damp Pro (INSTALLED) 36sq ft. SS Luxury Liner (INSTALLED) Big 3 (RF 0 Gauge) All RF power wire, speaker wire, RCA's RF T3 6.5" components (2 sets) have RF T800-4 ad (mids & highs) XS Power D925 XS Power D3400 have still undecided on sub/sub amp
Chrysler200s Posted January 28, 2012 Author Report Posted January 28, 2012 if you use 2 amps (or one 4-channel amp) you can use the bi-amp feature of the T2 components or just run active. This would allow you to adjust the level of the tweeters and mis separately and if you run active you can also adjust the x-over points. I dont know what running active is? 2011 Chrysler 200 S (Black on Black on Black w/ black trim) Changing all the time but, for now..... *Coming Soon* 80sq ft. SS Damp Pro (INSTALLED) 36sq ft. SS Luxury Liner (INSTALLED) Big 3 (RF 0 Gauge) All RF power wire, speaker wire, RCA's RF T3 6.5" components (2 sets) have RF T800-4 ad (mids & highs) XS Power D925 XS Power D3400 have still undecided on sub/sub amp
Chrysler200s Posted January 28, 2012 Author Report Posted January 28, 2012 bumpity bump? 2011 Chrysler 200 S (Black on Black on Black w/ black trim) Changing all the time but, for now..... *Coming Soon* 80sq ft. SS Damp Pro (INSTALLED) 36sq ft. SS Luxury Liner (INSTALLED) Big 3 (RF 0 Gauge) All RF power wire, speaker wire, RCA's RF T3 6.5" components (2 sets) have RF T800-4 ad (mids & highs) XS Power D925 XS Power D3400 have still undecided on sub/sub amp
Recommended Posts
Archived
This topic is now archived and is closed to further replies.