redrider Posted April 16, 2012 Author Report Share Posted April 16, 2012 i used the ported calc on this website http://www.bcae1.com/spboxnew2.htm but turn the box so that depth 1 was my front and depth 2 became my back wall. i tried to keep the glass face pretty much flush with the angle, so the volume calc is give or take alittle but still in the range i need for the subs. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
redrider Posted May 12, 2012 Author Report Share Posted May 12, 2012 well 3 cans down.... bout 5 coats of color on it. its now outside baking in the sun. have no idea what happened but it started to bubbling up and i felt a soft spot that wasnt there before so i had to cut it up and start filling it. couple shots with it baking in the sun....3 coats down....3-5 to go. just some fun with my phone. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
redrider Posted May 12, 2012 Author Report Share Posted May 12, 2012 should be done with it this weekend..... have bout 3-5 more coats of clear to put down and then hit it with 2000 grit and wetsand it..... then carpet the sides, run wires and then install the box with the false floor. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
Lbox88 Posted May 12, 2012 Report Share Posted May 12, 2012 Looking good! UBL | Build Log Link to comment Share on other sites More sharing options...
redrider Posted May 12, 2012 Author Report Share Posted May 12, 2012 thanks.... im trying. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
redrider Posted May 21, 2012 Author Report Share Posted May 21, 2012 well didnt get much done this weekend since i wasnt happy with the paint so i hit it again with some more color then clean.....i think i got it to the point where i like it. just have to add the carpet to it. i also went ahead and carpeted my false floor and did one more test fit before installing it. wasnt a productive weekend since i kept hitting road blocks and one of them was trying to find a place to run this 0ga power wire but i think i have that figured out. here are the progress pics from the weekend....i know doesnt seem like much has changed. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
redrider Posted May 27, 2012 Author Report Share Posted May 27, 2012 well got a small update.... the box is almost ready to go in. i finally got it carpeted, the power and ground wires ran and in place and the false floor secured. im off monday so goal is to get the box in and subs beating. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
redrider Posted June 27, 2012 Author Report Share Posted June 27, 2012 sorry for the lack of updates.... past few weeks were crazy since I got married, my homes a/c went out(replaced the whole dame thing), and work has had me swamped but i did managed to make it to the point of almost complete. all i have left is to wire up the subs to the amp but i have to go get an allen wrench tomorrow that fits the amp terminal since the 15+ i have dont fit...go figure. here are a few updated pics. couple led shots finally subs meet box and truck lol audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
CFAIST Posted June 27, 2012 Report Share Posted June 27, 2012 Clean as hell man. And the fact your useing Cadence is awesome. Not to many around here use them but anything Ive ever had of theirs I liked Alot. Keep up the great work man. C.A.R. AUDIO Faist Audio Concepts F.A.C. 96 Escort wagon Murdered out (redneck style) Eclipse HU, CDT classic Components ED Nine.2, Hifonics 1608d (borrowed) 2 Powerbass M 15"s 6 cubes tuned to 30 hz 2005 State record holder 0-600 Consumer 143.7 USACi Kick (1 Soundstream SPL15, JL e1200) 2009 3rd Loudest 0-1000 Trunk In Iowa USACi 145.00 kick. (4 Powerbass PS-10's US AMPS MD3D) 146.2db Unofficial. 6-ps-10's MD3D. Personal best 150.9DB 4 Powerbass M-15Ds. American Bass VFL150.1 at .5 ohm 2010 Usaci 0-1000 mod Iowa state record holder 149.4DB Check out my youtube channel CFAIST1 Link to comment Share on other sites More sharing options...
redrider Posted June 27, 2012 Author Report Share Posted June 27, 2012 Clean as hell man. And the fact your useing Cadence is awesome. Not to many around here use them but anything Ive ever had of theirs I liked Alot. Keep up the great work man. thanks man.... yeah i figured i go a different route plus i couldnt beat the deal i got on the subs and amp from cadence directly. hopefully tomorrow i can post up how it sounds after messing with it for a bit. audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.