MD7786 Posted February 14, 2012 Report Posted February 14, 2012 I'm puttting a second yellow top in and ran 0 gauge from front to back. 0 from back to cap then 4 gauge from cap to amp. Does that defeat the purpose?
AB18VFL Posted February 14, 2012 Report Posted February 14, 2012 ditch the cap, with big 3 and a second batt, your voltage should be fine. some people might disagree, but if it was MY build, i would sell the optima and get a kinetik. SUBSCRIBE AT YOUTUBE! 18abVFL < CLICK!! 2005 Subaru Impreza My build log. Head unit- Kenwood Excelon KDC-X695 Front doors- Rockford Fosgate 6.5" Prime components Rear doors- Rockford Fosgate 4" Punch coaxials Sub amp- Audiopipe AP18001d Subs- Two American Bass TNT 10"s Box- 2.6 cubes @ 34hz, 36in of port Big 3 & run of Raptor 1/0 to rear powercell TEAM 808 UPSTATE NY. Can it be heard 2 blocks away, thats how i rate systems.
MD7786 Posted February 14, 2012 Author Report Posted February 14, 2012 Well I'm I got 2 yellows brand new for $100 so thats yy I went with them. Would the cap hurt or the 4 gauge to the amp?
AB18VFL Posted February 14, 2012 Report Posted February 14, 2012 i'm not too experienced with capacitors (probably because i've always been told NOT to use them). I have heard that they put extra stress on the alternator. SUBSCRIBE AT YOUTUBE! 18abVFL < CLICK!! 2005 Subaru Impreza My build log. Head unit- Kenwood Excelon KDC-X695 Front doors- Rockford Fosgate 6.5" Prime components Rear doors- Rockford Fosgate 4" Punch coaxials Sub amp- Audiopipe AP18001d Subs- Two American Bass TNT 10"s Box- 2.6 cubes @ 34hz, 36in of port Big 3 & run of Raptor 1/0 to rear powercell TEAM 808 UPSTATE NY. Can it be heard 2 blocks away, thats how i rate systems.
MD7786 Posted February 14, 2012 Author Report Posted February 14, 2012 Ok but my ultimate goal is to get my lights tto stop blinking. With 4 gauge to amp instead of 0 still do that?
Ragehole Posted February 14, 2012 Report Posted February 14, 2012 i would do 0 gauge every where possible. unless your amp cant do 0 gauge, then i would do whatever the amp requires.
MD7786 Posted February 14, 2012 Author Report Posted February 14, 2012 Ok cool. That's what iI was wondering. I have the jl 1000/1 so im almost positive 0 wont fit but i hhave it everywhere else.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.