NickTheBassHeadCook Posted February 14, 2012 Report Share Posted February 14, 2012 I have two preouts on my headunit but I need to install a third amp, The third amp I want to install is a mono amplifier to power the mid-bass drivers in my doors, only bass. Not the full range speakers. could I use the output off of the amp powering my subs? Help please. Never put over 2 amps in my car before so this is new to me. Quote Link to comment Share on other sites More sharing options...
4Bent Posted February 14, 2012 Report Share Posted February 14, 2012 not to b rude but.. duhh... Quote BlowthroughSubs rebuild Amps 1-SAZ3500 1-T4004Coaxial 1Set Alpine Type-R Components 1 Set- kicker ks 5.21 Set- Kicker ks 6x8 Reciever Pioneer DEH-P7400HD2000 Ford F-150 EXT Cab Clarion EQ Link to comment Share on other sites More sharing options...
donpablo Posted February 14, 2012 Report Share Posted February 14, 2012 Use the output to the new amp Quote 2015 F-150 Platnuim Link to comment Share on other sites More sharing options...
ALPINE408 Posted February 15, 2012 Report Share Posted February 15, 2012 output of other amp or RCA Y splitters Quote Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
neuspeedescort Posted February 15, 2012 Report Share Posted February 15, 2012 i would use the pass thru on your mid & high amp. last i checked your mid bass didn't drop off at 80-100 hz. use the full range out of the mid & high amp you currently have and cross it over properly. if you wanted a sub up front then you could use teh sub amp as a pass thru. NEUMAN Quote Link to comment Share on other sites More sharing options...
NickTheBassHeadCook Posted February 15, 2012 Author Report Share Posted February 15, 2012 I guess what I mean to ask is would a crossover be better to get then using my amps outputs? Quote Link to comment Share on other sites More sharing options...
neuspeedescort Posted February 15, 2012 Report Share Posted February 15, 2012 yes! NEUMAN Quote Link to comment Share on other sites More sharing options...
NickTheBassHeadCook Posted February 15, 2012 Author Report Share Posted February 15, 2012 How would I want to run the rcas through the crossover? My headunits preouts have a front output and a rear/sub out put. Right now I have the front running to the 4 channel and the rear/sub to the mono. I'm adding a 300 watt mono to power the subs in my doors. Quote Link to comment Share on other sites More sharing options...
ric006 Posted February 15, 2012 Report Share Posted February 15, 2012 use one side of the splitters to one amp and the other side of the splitter to the other Quote Link to comment Share on other sites More sharing options...
neuspeedescort Posted February 15, 2012 Report Share Posted February 15, 2012 (edited) note two in three out. NEUMAN Edited February 15, 2012 by neuspeedescort Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.