box gurus please chime in

[teardrop]

The box should spec at 14cuft@35Hz the subs displacement is not listed. As always port area per cube should be 12-16.

ok so should be good to go on size and tune i would like it to be in the 33 hz range tho any sugestions?

[Joe X]

A Torres snap would let me see better, I really don't know how you figured out that design.

[teardrop]

yea i don't ether that's my main problem

[varietyguy]

I got a little over 13 cubes and your port is tuned to 34.09 hz with 189 sq in.

[Joe X]

I've got [email protected] which is about right for those subs, displacement was set at 0.2cuft per sub.

For a 33Hz tune change the port to 5" wide and 17.25 deep, add a second baffle on the top of the existing one and add top to bottom crossbracing (a couple 2" diam wood rod dowels) between each two subs.

Those would be my suggestions.

Edited February 24, 2012 by Joe X

[teardrop]

it is a double baffle