teardrop Posted February 24, 2012 Author Report Share Posted February 24, 2012 The box should spec at 14cuft@35Hz the subs displacement is not listed. As always port area per cube should be 12-16. ok so should be good to go on size and tune i would like it to be in the 33 hz range tho any sugestions? Quote Link to comment Share on other sites More sharing options...
Joe X Posted February 24, 2012 Report Share Posted February 24, 2012 A Torres snap would let me see better, I really don't know how you figured out that design. Quote Link to comment Share on other sites More sharing options...
teardrop Posted February 24, 2012 Author Report Share Posted February 24, 2012 yea i don't ether that's my main problem Quote Link to comment Share on other sites More sharing options...
varietyguy Posted February 24, 2012 Report Share Posted February 24, 2012 I got a little over 13 cubes and your port is tuned to 34.09 hz with 189 sq in. Quote 1992 Mazda 323 http://www.stevemead...323-wall-build/ Link to comment Share on other sites More sharing options...
Joe X Posted February 24, 2012 Report Share Posted February 24, 2012 (edited) I've got [email protected] which is about right for those subs, displacement was set at 0.2cuft per sub. For a 33Hz tune change the port to 5" wide and 17.25 deep, add a second baffle on the top of the existing one and add top to bottom crossbracing (a couple 2" diam wood rod dowels) between each two subs. Those would be my suggestions. Edited February 24, 2012 by Joe X Quote Link to comment Share on other sites More sharing options...
teardrop Posted February 25, 2012 Author Report Share Posted February 25, 2012 it is a double baffle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.