carlosg_313 Posted February 27, 2012 Report Share Posted February 27, 2012 did you not read my post? voltage is over 13v most of the time... i dont even get to get to full tilt becasue of electrical and subs hitting xmax, bos still needs to be shrank Is that 13v off the battery or off the amp? Quote How do the Japanese feel about bass?You know that since 03/11/11 Progene? I just saw that stuff on CNN. They said it makes your junk shrink all up. lol.im pretty sure the op wont even notice if it gets even smaller. Refs - Pstone11, porksoda, coleman Link to comment Share on other sites More sharing options...
LoudBimmer Posted February 27, 2012 Report Share Posted February 27, 2012 Maybe clipping or over loading it. I had this problem when I was going over my set volume25/35) by 2-3 clicks. I'm wired down to 1 ohm on saz2500. Quote Link to comment Share on other sites More sharing options...
SnowDrifter Posted February 27, 2012 Report Share Posted February 27, 2012 Is that 13v off the battery or off the amp? right at the amps Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
fox_racin4 Posted February 27, 2012 Author Report Share Posted February 27, 2012 its probably a rise issue. people with amps wired down into oblivion tend to roll up the volume while burping to not get the amps to protect. if they were to just press play with the volume full tilt, the amps will protect because, i assume, rise cant take into effect that quickly. I rioll into volume for that reason there And rarely burp Its just a daily vehicle and does decent numbers which is a bonus Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
fox_racin4 Posted February 27, 2012 Author Report Share Posted February 27, 2012 Maybe clipping or over loading it. I had this problem when I was going over my set volume25/35) by 2-3 clicks. I'm wired down to 1 ohm on saz2500. Mine us 52/62 And sub at 0 I get to 52/62 ten sub volume to -10ish then protects Sometimes i get it a bit higher but then voltage really drops and i back off and keep voltage over 13v Only way it can be from clipping is from clipped music Which is very possible Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.