Amart88 Posted March 12, 2012 Report Posted March 12, 2012 I am just getting ready to start soldering terminals on my Knu Fleks wire. I was wondering if I need to use any flux when using 60 40 solder? I read meades how to solder 0 gauge on here but it did not say that he used any flux. Just wondering before I start, to save me any possible grief. I have soldered 0 ga before but it was cheap lead free shit i used and i did use some old jelly flux. Don't know if it's nessesary. My 2005 s10 blazer build. 4 zcon 18's walled.
SnowDrifter Posted March 12, 2012 Report Posted March 12, 2012 No, you don't need to if every thing is clean. But you might as well just use it. It's like a condom. You use it just in case. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Recommended Posts
Archived
This topic is now archived and is closed to further replies.