excelon72 Posted April 10, 2012 Author Report Share Posted April 10, 2012 the stanley is actually smaller than what your thinking, its 2" high so great for car audio. the other one i got at michaels arts and craft store it is a 5x7 photo holder box Link to comment Share on other sites More sharing options...
Torres Posted April 10, 2012 Report Share Posted April 10, 2012 ok awesome thanks. i may go look at them in person. there's a hobby lobby near my work that might have something similar Link to comment Share on other sites More sharing options...
excelon72 Posted April 11, 2012 Author Report Share Posted April 11, 2012 no problem it turned out to be awesome for the stuff that just doesnt seem to fit anywhere else Link to comment Share on other sites More sharing options...
excelon72 Posted April 13, 2012 Author Report Share Posted April 13, 2012 finally got some time today. took out the seat belts. ran into a little issue. the connector is a bit tough. looked it up and you need to remove the black snap keeping the yellow connector in place. i started to lay the rca cables and the remote wire i then moved onto the b pillar i ran the wires for the tweeter. i did not want to remove the dash so i removed the 2 corner bolts just enough to run the wire the top bolt near the top of the dash the bottom bolt near the kick panel the finished run i ran the wire through the factory grommet from the door the weather was so nice i used it to install the fat mat in the rear seat and i even managed to finish the passenger door and this is why you dont by razor knives in a dollar store lol Link to comment Share on other sites More sharing options...
knowledge Posted April 14, 2012 Report Share Posted April 14, 2012 very nice and clean work bro i lie it a lot plus ur doing it all correct REFF'SMy linkEBAYhttp://feedback.ebay...ck&myworld=trueI love car audio so much because I will never be done. I can never win, and I will never get it finished or perfect. It always has me coming back for more, I can never get my fill of it, but I get what I need. Link to comment Share on other sites More sharing options...
HunterJohnson Posted April 14, 2012 Report Share Posted April 14, 2012 whered you run your power wire? I ran 2 runs of 2/0 through the center Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
excelon72 Posted April 14, 2012 Author Report Share Posted April 14, 2012 thank you for the compliment knowledge. it takes a lot longer but its worth it. I like your signature BTW very true! Link to comment Share on other sites More sharing options...
excelon72 Posted April 14, 2012 Author Report Share Posted April 14, 2012 hunter i am running my 0 gauge power wire along the drivers side of the trans hump or the left side of the drivers side seat well have not decided Link to comment Share on other sites More sharing options...
excelon72 Posted April 14, 2012 Author Report Share Posted April 14, 2012 i am mounting the tweeters on the dash for better imaging. i pulled the dash up just enough to get the wire underneath the lip . It was a PAIN , but turned out good. i then went about choosing a location for the Audiocontrol Matrix and settled on the glove box as i dont need the space for anything. Then i had a little time to vibration dampen the trunk I made the connections for the door speakers and the tweeters. Not bad for a mornings work. Link to comment Share on other sites More sharing options...
excelon72 Posted April 14, 2012 Author Report Share Posted April 14, 2012 i ordered these 2 items yesterday hopefully they will be here soon and this for sirius Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.