kryptonite Posted March 21, 2012 Report Share Posted March 21, 2012 So i started planning this build several months ago with a pair of Audioque HDC3 15s and a DC PAI3000.1 but sold the amp and the 15s wouldn't fit in the trunk for anything lol. Wanting to stay in the trunk with everything but still keep 15s, i kept looking around and here is what i did while i looked.... Here is the car, 1999 Chevrolet Cavalier 4 door 2.2L engine. Bought it from my girlfriend since she wanted a new car and i needed something that would get more than 10 mpg driving out to work and back. Bought her a pioneer DEH-1100 cd player for her birthday which worked out for me in the end haha. Go Sabres! DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Decided that i was going to deaden the floor of the car since i had the interior out and cleaning it. Just enough left over to do the front doors when i get the new speakers put in. Thanks again Matt (hellboundtrain) Put the carpet back in to get it out of the way, hopefully i won't have to take it out again lol DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Another nice day, so i decided to spray the interior down with deodorizer to get the crappy air freshener smell out, and worked on the trunk a little bit. Grabbed some weather strip to put a double seal on the trunk lid, works wonders for some of the vibrations Grabbed some basic roofing flashing for the rear deck lid and the trunk side walls. Didn't want to spend a ton of money on deadener since i wasn't sure where i wanted to put it all yet but didn't want to have to tear the trunk apart multiple times. In behind the taillights Package tray apart Sail panels for the trunk opening deadened and reinsulated C-pillars deadened and reinsulated Wheel wells Trunk side walls and the air vent deadened DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Bought a new toy Time for an cold air intake kit Gotta love mud in the fender well, ugh Stock fender well box much more room Full exhaust is required Magnaflow High flow direct fit converter into 2.25 stainless catback exhaust system The converter stayed but the catback was rattling on the underside of the car so i pulled it and put stock back in, i'll eventually get a new mid pipe bent up with the correct angles and put the stainless back on Just a cool picture lol DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 New headlights are needed since the driver side flops around, plus i want HIDs and projectors lol DDM tuning to the rescue! 5000k lows and highs Need to get the z24 bumper for the car and have some rust spots taken care of before i put the projectors and HIDs in. Not to mention the salt season is just ending so i'll wait until the roads have been washed down by the rain so i don't get too much dust scratching on the new plastic lenses lol. Finally decided on the subs, a pair of Kicker CVR 15s Amp will be a rockford fosgate P500-1bd that i picked up from a coworker. The subs are dual 2 ohm each so being wired to 2 ohm on the amp will see 200 watts per sub. Each sub is rated for 500 rms so if i feel the need (which i probably will haha), i can buy a second 500-1 and put one amp per sub. We shall see.... DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Lets run some wiring, shall we? Did i mention i shoehorned a 3400 under the hood? Only needed a sledge hammer and a 1/2" extension to make some sheetmetal adjustments lol Wanted a voltage gauge and since my cigarette lighter was useless, perfect spot! Will get installed pics when i take videos.... DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Lets build something! I love this app! ermm i think something is wrong... uh yup measured wrong and now the one is too far over lol. Oh well, covered that side up with another board and put the subs in the top. Wiring up some terminals in the side of the box I didn't get any pictures because i was getting pissed, but i had to cut and massage the sail panels and package tray lip to get the box to fit. Oh yeah lol, trunk opening was too small, had to put the interior again and slide the box through the passenger door and into the trunk Ended up with a fully sealed box because i didn't feel like cutting the port just yet, and i'm glad i left it sealed, slams pretty good for just 200 watts each. This box is probably only temporary so i'll build another one better and more than likely sealed Just a couple random pics left Lil bro takin the door panel apart to see what's up with the speakers Need to grab some adapter to make the speakers fit, not sure if i want to do pods in the doors yet. Gonna try to get some vids today while i'm at work. What do ya'll think? DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
scottam Posted March 21, 2012 Report Share Posted March 21, 2012 i hate to say it but kickers? cmon... coulda went with something ALOT better for the same price but thats just me im sure itll slam anywase Link to comment Share on other sites More sharing options...
kryptonite Posted March 21, 2012 Author Report Share Posted March 21, 2012 Find me a pair of 15s that cost less than $250 shipped for the pair and i'll run them lol That will handle the 500 rms each with ease DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
ChromeJerome Posted March 21, 2012 Report Share Posted March 21, 2012 lookin good so far man, can't wait to see this thing completed! They say money can't buy you happiness...but money buys car audio...and car audio makes me happy. The man makes the money, the money shouldn't make the man. 1999 Chevrolet Blazer LS 4D Pioneer AVH-2400BT (Double DIN Conversion) (2) Skar VVX-12 D4 Crescendo BC2000D (2) MB Quart 4.125 Image Dynamics CTX 6.5 Components Infinity Reference 6032cf (4) Infinity Reference 6432cf (2) 48 sq ft. Damplifier Big 3 in 0G Optima YellowTop D75 under the Hood XS Power D1200 in the rear 2 Full runs 1/0 R.I.P. 1993 Cadillac Deville Touring 4D Pioneer DEH-P7200HD Headunit 2 Kicker Comp C15's Lanzar HTG257 2000W (For now) 2 Pioneer TS-G1344R Coaxials 2 Sound Ordnance P-35 2 Rockford Fosgate P1694 6X9's Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.