ZombieFatMan Posted March 22, 2012 Report Posted March 22, 2012 Ok so i have 2 MTX9500's (T9515-44) one Brz2400.1d at one OHM in a 92 blazer 2door as i am not good with wood...(insert joke here ) i had a small car audio shop make it to MTX spc. well thats what he said anyway. it hits hard but i feel like it should be more, port seems small or not in the proper location. giving consideration to PWK design for a diffident box . any thought would be helpful second pic is at the end of the port looking back , 3rd is a shot of the port Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
412 CVX Posted March 22, 2012 Report Posted March 22, 2012 what are the specs of the box and port? Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
ZombieFatMan Posted March 22, 2012 Author Report Posted March 22, 2012 (edited) sorry laptop crashed on my lol this is what i just did up sorry is crappy but thats what it is Edited March 22, 2012 by FatManRepair Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
ZombieFatMan Posted March 22, 2012 Author Report Posted March 22, 2012 what are the specs of the box and port? what do you think ? oh an Bump Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
HunterJohnson Posted March 22, 2012 Report Posted March 22, 2012 (edited) thats gonna be around 33hz if ur wood is 3/4 thick and then its a little higher bc your woofer displacement Edited March 22, 2012 by HunterJohnson Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
ZombieFatMan Posted March 22, 2012 Author Report Posted March 22, 2012 thats gonna be around 33hz if ur wood is 3/4 thick and then its a little higher bc your woofer displacement ya its 3/4 Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
HunterJohnson Posted March 22, 2012 Report Posted March 22, 2012 33hz then bro Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
ZombieFatMan Posted March 22, 2012 Author Report Posted March 22, 2012 33hz then bro How did you com to that determination ? sorry kinda new to this an dont understand why the emphasis on what frequency boxes are tuned to as opposed to what frequency range it plays along? or is that basically the same? Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
SoCaLBaMF Posted March 22, 2012 Report Posted March 22, 2012 I got around 30hz... with 8.5 sq in per cube. Hella small port. Quote 2004 Bagged Trailblazer (4)18" Sundown Nsv3s (4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4 (2)DC power SP 270s, (14)XS Power d3100s, (1)d6500
sprkn_ranger Posted March 22, 2012 Report Posted March 22, 2012 (edited) I'm on mobile so I can't use Torres right now, but what is the net cubic ft of that box? That port is only 75in^2 which seems kinda small for that box. Edit- ^ Ninja'd!!! Lol but yea I thought it looked small. Edited March 22, 2012 by sprkn_ranger Quote Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.