external port length

[illest g]

using the torres box calc thing. i have figured out that i need 12'' of port. i will be using 2 ports though. both round. at 2'' wide each. the calc says i need it to be 12'' long. since im running 2 ports. is that 12'' each? or 6'' each?

[Joe X]

Not at all

[illest g]

thanks for the help.

what do you mean not at all? care to explain?

[illest g]

this is what i have...

i didnt fill these out since i have a mac and cant use this program. a friend did it for me.

ill be using 2 round ports. 2'' diameter. can someone please tell me how long EACH port needs to be

Edited March 28, 2012 by illest g

[Joe X]

They would need to be 12" each.

But your design have other problems.

[illest g]

what are these problems.

this would go a lot quicker if you could explain what you are talking about instead of just saying half sentences and expecting people to read minds throuhg their computer screens

[Bump4life]

ur port area is too small your port area per cube is too small, your box is most likely too small

[illest g]

req box size is .9 -1.5

[john253a]

your not useing it right

if the port in internal you have is right

but for external port you need to the length outside box

+ the port:cuft is way to low

for daily port:cuft should be

10-13 areo 14-16 slot

youll need to look at something like this, and yes that is the length of both ports

[illest g]

ok so just to make sure i understand...if i use two 3'' diameter EXTERNAL ports. then EACH port needs to be 35.5'' long? correct?