illest g Posted March 28, 2012 Author Report Share Posted March 28, 2012 i just noticed that you have it set at .75 wood thickness. im using .5. i dont know if that will change any other numbers that are important here or not. Quote Link to comment Share on other sites More sharing options...
john253a Posted March 28, 2012 Report Share Posted March 28, 2012 yes both 35.5 long but if they are flared ends they need to be longer for flared ends idd to 38" long each secondly what sub are you using and how much power are you driving it with as if your under the max power idd make the box as close to the 1.5 as possible but if you over-driving it then 0.9 is good Quote Link to comment Share on other sites More sharing options...
illest g Posted March 28, 2012 Author Report Share Posted March 28, 2012 Fi ssd 10. 1000wrms Quote Link to comment Share on other sites More sharing options...
john253a Posted March 28, 2012 Report Share Posted March 28, 2012 few things to start off with need to be min 5/8" if braced, or 3/4" no bracing box depth is ok, but for better bass out put idd buld it atleast 8.75" after sub displacment your box will be 0.78, so your ports will need to 2 off 3" 41" long and iff flared 2 off 3" 44" long Quote Link to comment Share on other sites More sharing options...
Joe X Posted March 28, 2012 Report Share Posted March 28, 2012 (edited) How about a nice sealed enclosure! Edited March 28, 2012 by Joe X Quote Link to comment Share on other sites More sharing options...
john253a Posted March 28, 2012 Report Share Posted March 28, 2012 +1 that would be a more ideal box if he can fit only 1 thing idd change is the port in that box idd do 4 off 2" @22" long 2x3" @26 is a bit small Quote Link to comment Share on other sites More sharing options...
uhoh_45 Posted March 28, 2012 Report Share Posted March 28, 2012 (edited) lol this thread is full of laughs haha if you plan on fiber glassing in side of box then half inch is good but with those dimensions your working with your pretty screwed unless you've got more to work with and just didnt say yet like to me if your able to externally mount 2 2" pipes 31.5" out of a box i'd thing you have some room to work with... nom sayin Edited March 28, 2012 by uhoh_45 Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.