Tutorial And Link For The Calculator I Use

[BigPimpin91]

Bigpimpin91, http://www.zshare.net/download/13592483f0f519f6/

There's a link of the one with those 2 changes.

It should be set to read-onlt too.

Nice sig too.

Thanks,

and thanks for the Open Office link.

[littleitaly1990]

Dang amatt I never noticed this...thanks for posting!

[littleitaly1990]

can amatt or one of the mods sticky this?? For quick reference.

[duct_tape123]

What happens if the port ratio is over 9? When I entered all my info it came up as 20.9. Is that bad?

[duct_tape123]

BUMP

[BigPimpin91]

What happens if the port ratio is over 9? When I entered all my info it came up as 20.9. Is that bad?

Sorry bout the old bump.

You get port noise.

[97maxima]

what about adding in bracing,i see a spot for it .im just unsure about it

[duct_tape123]

Sorry bout the old bump.

You get port noise.

Well, I don't. I had already built the box and just for giggles I entered all the info into the calc and it came up with like 20 something. BTW the box wangs loud as shit, may have something to do with 4 15's??LOL

EDIT: here is a drawing of the box. I guess that it has three 18.5x2.75 ports instead of one huge one. There is a 2x4 ripped down to 2.75" every 18.5" to prevent flex.

[andym85]

what about adding in bracing,i see a spot for it .im just unsure about it

you just enter that manually

for instance...

say you have one 2x4 that is 10"long

granted its not exatcly 2" by 4"...but i would do 2 * 4 * 10 = 80 cubic inches....80/1728= 0.046296296 cubic feet

i forget which one you have to enter it into...i think its the cubic feet box...so just type in .0463 in there and it will reduce the total volume by that much

[kickerman]

for some reason i cant get the round port to work its givin me false readings