Kingleo's VR6. Audio completed and painted.

[kingleo]

will your back seats still go up, kinda looks like the box is pushed forward a good ways, kinda makes me wish i handn't designed my box to be 14 inchs tall so i wouldn't have to cut anything.

That box looks huge inside, are you still only on 1500 watts, i thought i only saw that 1 amp still, needs moar power lol

And that rear deck isn't moving at all compared to when i had my old set up lawl,

Yeah the seats go up. When I took the pics and vid the box wasn't secured. I'm gonna run the on amp until I do the recones they are only seeing around 1k at 2ohms. And with the box firing forward the rear deck hardly shakes which is what I wanted. The other way my tweets were popping out and the grills came off every time I cranked it up.

[ch0sen]

The rear deck is pretty flimsy anyways, when i was cutting into it so my 6x9s would fit the metal was bouncing like crazy

[Bump4life]

looks good. i have no problem with my center port. but definetly cant tell you if its bad or good from the video. but i can tell you need deadner!!

[kingleo]

looks good. i have no problem with my center port. but definetly cant tell you if its bad or good from the video. but i can tell you need deadner!!

That's coming. I know I shouldve done it first but it will all be redone. I'll be redoing the amp racks and movIng things around. Going to do more vids soon.

[AI James]

center port FTL, and your rear deck flexes to much for having wood along it. output seems about the same as a couple ok 10s

So when did you hear it? I don't remember giving you a demo. iPhone cameras don't pick up everything. There is no wood on the rear deck. But I guess that's all you do is try to shit on everybody's builds.

nah i don't shit on every ones builds. just when one doesn't look nice i say so. The wood on the rear deck i got confused with the other jetta build i was following on here.

As for center port, i don't need a demo to know its not the best box for that car. Center port just isn't the most efficient in that alignment. Furthermore the box could have been planned in a way where your not cutting the piece that main supports the back of the vehicle.

[AI James]

also please dont tell me thats your amp ground point up there in the trunk

[Bump4life]

also please dont tell me thats your amp ground point up there in the trunk

oh wow. i didnt even see that. it doesnt matter which ground it is. that is not a good spot for it.

[kingleo]

center port FTL, and your rear deck flexes to much for having wood along it. output seems about the same as a couple ok 10s

So when did you hear it? I don't remember giving you a demo. iPhone cameras don't pick up everything. There is no wood on the rear deck. But I guess that's all you do is try to shit on everybody's builds.

nah i don't shit on every ones builds. just when one doesn't look nice i say so. The wood on the rear deck i got confused with the other jetta build i was following on here.

As for center port, i don't need a demo to know its not the best box for that car. Center port just isn't the most efficient in that alignment. Furthermore the box could have been planned in a way where your not cutting the piece that main supports the back of the vehicle.

There wasn't that much metal that was cut. And I hue get every inch of space because this my only car and I still have a family to car around. The car is lowered on full FK coilovers and has a complete bushing upgrade. It's fine through the corners.

[kingleo]

also please dont tell me thats your amp ground point up there in the trunk

What you can't see is. It is a very temporary spot had remove the ground to get the box in. I will have run my wiring for my mids an RCA's up where the seat belt rollers are for clearance. My ground is actually a hole I drilled and bolted through the trunk floor. And had undercoating to protect from water or rust.

[kingleo]

With the box design I never tried a center port. Ive always did it on the side. Is there that much of a difference in output? I'm not worried about numbers.