Amart88 Posted April 15, 2012 Report Share Posted April 15, 2012 Well, I got 2 xp3000's and one d2700 that will be in paralell in my trunk. I was just going to make jumpers to connect them and hook amps to last xp3000 but I read if your going to be drawing alot of power that you shouls spead the power load out. Is it possible to make buss bar(s) for these 3 batts? Whats the best way to do so. Thanks oh and the bolts are m6 yes? The D2700 is the car starter batt but they are all going in the trunk anyway so they will be paralell. Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
chrishova Posted April 15, 2012 Report Share Posted April 15, 2012 This guy, Geoff C. (AudioAnonymous on here) https://www.facebook.com/jankiesmile#!/AudioAnonymous Can make coustom bussbars fast and cheap! http://www.teamprojectdb.com/ Quote Pontiac Grand Prix GT400a Mean Machine alt. EIGHT DD 12''s on a DDz2DD vo 8''s,6''s,5.25''s&tweetsNorfolk, VAhttp://www.youtube.c...ser/ovnorfolkvahttps://www.facebook.com/groups/TheSPLSpot/473815915987218/?notif_t=group_activity#!/chrishovahttp://www.stevemead...__fromsearch__1[/color] Link to comment Share on other sites More sharing options...
01ExSport Posted April 15, 2012 Report Share Posted April 15, 2012 ^ x2! Don't want to sound like a nuthugger, but he does do really good work. But to save money for doing something out of the ordinary for you, i'd just have a buss bar for your 2 3000's and have short runs of 0ga to your d2700. I can see that being very easy to mess up if you dont get the correct angle/distance Quote Link to comment Share on other sites More sharing options...
Amart88 Posted April 16, 2012 Author Report Share Posted April 16, 2012 ^ x2! Don't want to sound like a nuthugger, but he does do really good work. But to save money for doing something out of the ordinary for you, i'd just have a buss bar for your 2 3000's and have short runs of 0ga to your d2700. I can see that being very easy to mess up if you dont get the correct angle/distance Yeah damn D2700 is like 3/4" smaller and I'm not too experienced with metal work. What it I have the buss bars seperate form the terminals? (like exo did in the van) one along the pos side and one along the negitive with short jumpers to the buss bar from the terminals. Then from the bar to power and bar to ground? Just a thought. Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
01ExSport Posted April 16, 2012 Report Share Posted April 16, 2012 If you were to do that, Just use wires to connect all of your batteries. You're drawing power from the same bank regardless. Quote Link to comment Share on other sites More sharing options...
Amart88 Posted April 16, 2012 Author Report Share Posted April 16, 2012 If you were to do that, Just use wires to connect all of your batteries. You're drawing power from the same bank regardless. Yeah but i want to spread the power from all 3 batts to a main source. Instead of from the last battery as I will be drawing a fair amount. So what your saying is I can do that but still connect all the batts with wires also? Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
01ExSport Posted April 16, 2012 Report Share Posted April 16, 2012 I might be mistaken, but that's the beauty of fast discharge, if one battery gets drawn from, the other batteries will supply the power to maintain the same voltage as the rest. Think of it as battery osmosis. That's what i took from researching, at least. Quote Link to comment Share on other sites More sharing options...
AA98hoe Posted April 16, 2012 Report Share Posted April 16, 2012 Buy 2inby 3/8 flat stock drill holes for battery terminals and as many holes as you want for 5/16 x11/2 bolts then use 0glugs and bolt to bussbar Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
Amart88 Posted April 16, 2012 Author Report Share Posted April 16, 2012 Buy 2inby 3/8 flat stock drill holes for battery terminals and as many holes as you want for 5/16 x11/2 bolts then use 0glugs and bolt to bussbar Copper or Aluminum? pro cons? Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
95legwagon Posted April 16, 2012 Report Share Posted April 16, 2012 copper is a better conductor but costs way more. aluminum is a really good conductor also and cheaper than copper. aluminum also dissipates heat really well....not sure about copper with heat. Quote i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks. / LOL My Low Budget Build: Green 1995 Subaru Legacy wagon 147k- $1K headunit- pioneer premier deh-p650-$25 4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50 4 vvme L11 10"s <- $30 shipped a piece 6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more 2 aspm 1300 strapped Selenium 6"s in the front doors on headunit power- for now -$20 quantum tweets in door-for now -$10 boston acoustic 5 1/4 in rear doors- for now-Free big 3 1/0 and 4awg throughout. roof sound deadened (not peel n seal ftw)-free on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test about $430 for everything<----Not bad at all still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.