Amart88 Posted April 16, 2012 Author Report Posted April 16, 2012 http://www.amazon.co...31685715&sr=1-1 What about these? littl emore expensive but... http://www.amazon.com/PARTSMART-SMR35656-Flared-Copper-Lug/dp/B004MF5ZMM/ref=sr_1_3?m=A2SUCQG1F31RUU&s=automotive&ie=UTF8&qid=1334588913&sr=1-3 Quote My 2005 s10 blazer build. 4 zcon 18's walled.
carshateme Posted April 16, 2012 Report Posted April 16, 2012 (edited) There...3/8 stud http://www.delcity.n...ils?item=906855....$8.30/pack of 10 Edited April 16, 2012 by carshateme Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
carshateme Posted April 16, 2012 Report Posted April 16, 2012 yeah yeah.. Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
Amart88 Posted April 16, 2012 Author Report Posted April 16, 2012 yeah yeah.. Ok thanks. I have 40 in my cart but for 6$ more should i get the tinned ones? Quote My 2005 s10 blazer build. 4 zcon 18's walled.
carshateme Posted April 16, 2012 Report Posted April 16, 2012 (edited) Copper is better than tin when it comes to being a conductor. Silver is the best. Edited April 16, 2012 by carshateme Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
JacobB89 Posted April 16, 2012 Report Posted April 16, 2012 I have no problem with the ones i posted using 1/0knu kca fits in there good and snug and they are good quality. Quote Big Wheels Are Like G-Strings...Anyone can put them on but it don't mean they look good.....
Amart88 Posted April 16, 2012 Author Report Posted April 16, 2012 Copper is better than tin when it comes to being a conductor. Silver is the best. So just stick with the non tinned ones? They re still in my cart lol. made some dumb mistakes in the past so now I overthink everything. just concerned that the bare copper will oxidize or get all shitty on me after a while but I could be mis-inforemed Quote My 2005 s10 blazer build. 4 zcon 18's walled.
carshateme Posted April 16, 2012 Report Posted April 16, 2012 Well..mechman uses copper for their products, you'll see a lot of people using copper. I'm not going to recommend anything..cuz I'm pretty sure someone will flame my ass for saying my opinion. Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
AA98hoe Posted April 16, 2012 Report Posted April 16, 2012 Tinned or copper doesn't really matter unless its exposed...then id use tinned which is just anodized copper Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.