Nivram Posted April 19, 2012 Report Share Posted April 19, 2012 (edited) Here is the deal.. i have a rockford t1000 amp. ^ i messed up my title sorry. I have 3 d4 subs my amp says it is 1ohm stable however if i wired up my 3 subs i can run it at 2.7ohm:-} 6ohm :/ Or..... .67ohm =D!!! Is it possible to run my amp at such low ohm If i have the right electrical? I have the big 3 in 0ga A run of 0ga to amp A run of 4ga to nothing atm ..Just picked up a kinetic hc800 planed on wiring it up with the 4ga optima red top up front Soon to be hc800 in the back Will i kill my amp if i do this? If i tune the amp clip free or somthing could i run low ohms daily? I will be getting another sub soon im just itching to hear it now!! Hellppp. Edited April 19, 2012 by Nivram Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
JustinWilson Posted April 19, 2012 Report Share Posted April 19, 2012 normally I would say if you have to ask, but truthfully .67 nominal will be fine with the extra battery assuming you have 100% clean grounds and keep the power clean. Quote 06 GP GXP Google Nexus 7 16gb Rockford Fosgate 3SIXTY.3 *Electrical* DC Power 320a HP 2 - Juicebox Bananas g31 Stinger SPP2250 rear Kinetik HC1800 side of wall Optima Red Top front Monster Cable 1/0, 2 runs to rear Monster Cable 1/0 Big 3 2-Rockford Fosgate T1652S's Rockford Fosgate T400-4 Rockford Fosgate T40001bd (4693rms @1ohm) 4-Sundown SA-15 D2's wired @ 1ohm/These are on the way out for 4 one off Eminent Audio 15's 15.2 cubes net tuned @34hz! Walled off DBdrag official 151.6db @46hz GXP Build log!:GP GXP Walled Quality is the sign of a true enthusiast! Refs: Link to leave more: http://www.stevemead...91#entry1603091 Bought from: Trippi (RF T2500bd, T1000-4),bre2ts (25ft Knu 1/0) Sold to: shmew22 (T1500bdCP), Rev. Wrath (RF 3SIXTY.1), trjohnst (Knu 1/0, 3 fuse holders), Enemyofsilence (Audio Technix, RF T400-4). Link to comment Share on other sites More sharing options...
Nivram Posted April 19, 2012 Author Report Share Posted April 19, 2012 Okay. I heard if you have the batts and voltage solid. It would be able to work. but i dont want to toast my amp being stupid. All of my grounds are filed down and sanded to bare metal. engine block to strut towers to neg. Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
JustinWilson Posted April 19, 2012 Report Share Posted April 19, 2012 ground for amp has to be short and clean also Quote 06 GP GXP Google Nexus 7 16gb Rockford Fosgate 3SIXTY.3 *Electrical* DC Power 320a HP 2 - Juicebox Bananas g31 Stinger SPP2250 rear Kinetik HC1800 side of wall Optima Red Top front Monster Cable 1/0, 2 runs to rear Monster Cable 1/0 Big 3 2-Rockford Fosgate T1652S's Rockford Fosgate T400-4 Rockford Fosgate T40001bd (4693rms @1ohm) 4-Sundown SA-15 D2's wired @ 1ohm/These are on the way out for 4 one off Eminent Audio 15's 15.2 cubes net tuned @34hz! Walled off DBdrag official 151.6db @46hz GXP Build log!:GP GXP Walled Quality is the sign of a true enthusiast! Refs: Link to leave more: http://www.stevemead...91#entry1603091 Bought from: Trippi (RF T2500bd, T1000-4),bre2ts (25ft Knu 1/0) Sold to: shmew22 (T1500bdCP), Rev. Wrath (RF 3SIXTY.1), trjohnst (Knu 1/0, 3 fuse holders), Enemyofsilence (Audio Technix, RF T400-4). Link to comment Share on other sites More sharing options...
Nivram Posted April 19, 2012 Author Report Share Posted April 19, 2012 It is less than a ft long and runs to the rear strut tower. Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
Nivram Posted April 20, 2012 Author Report Share Posted April 20, 2012 I will be hooking up my batt tommarow and crossing my fingers Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
Bump4life Posted April 20, 2012 Report Share Posted April 20, 2012 you can always txt me bro!! haha if you have questions. what you have in oyur car now? you always seem to be changin gthe setup ahah. you have 3 15s now in the wall? still only the T1000? Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
SlamminBeats Posted April 20, 2012 Report Share Posted April 20, 2012 what happened to the 4 SAs Quote Link to comment Share on other sites More sharing options...
Nivram Posted April 20, 2012 Author Report Share Posted April 20, 2012 Im switching the set up to 3 sa's and im on my t1000 still. I want to wire it down even tho its only 1ohm stable for more power. Im getting 4 It still isnt here yett. The only reason i have 3 atm is because i got one for 180bux at the sound shop with a full warranty!! it was used for a little bit but it is like new coils are still nice subs is 9.7/10 condition. I plan on working on the wall glassing bracing tuning and making a face plate to fit 2 sa's on the passenger side for now then finishing the driver side when the 4th comes in whenever that may be. slowly but surely. i just work alot i dont have much time ;/ cure time for that glass is going to kill me. Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
Nivram Posted April 20, 2012 Author Report Share Posted April 20, 2012 sorry guys i lost your numbers otherwise i would text for help. Quote Walled 2002 buick century A.K.A "Betty sue" polk 5 1/2 front doors 4 3in pillar speakers DD 3518's AQ 3500 v2 90ft of 0/1 ga tuned to 40hz :build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.