Ported box 2 MTX 9515's (repost for my site)

[meade916 11794]

heres another box i built not too long ago. It belongs to my friend Corey and was built for his pathfinder.

[meade916 11794]

[meade916 11794]

[meade916 11794]

[meade916 11794]

needless to say it pounded VERY hard and he was happy as can be.  When the people are happy, im happy   He also won a few battle of the bass comps with this box.....

[Ray 441]

Very nice Steve...ummm how to say this..  I sink a 1/2" roundover bit about a 1/16 of an inch on my ports, it helps to create a ledge to cut the carpet aound the port.Not at all saying you cut crooked, cause they look damn straight to me, but this trick helps the process...didnt know if you have ever tried it. But i do it everytime, makes that part just fly..also digging how you do 4 part sides, to keep the seams off of a corner, I might steal that 1... I do 2 par sides and split it in the middle of the panel, then just use hella glue on all corners, they never come off.But needless to say im still gonna try that 1.

[meade916 11794]

sweet, Glad you like  ;D ill take your advice as well.....the moe' tricks under the sleeve the better! 

[Ray 441]

Fo' shizzle and it not an extra step, cause you allready are gonna route it anyway. Let me know how it works for you.

[CJL 1]

Hey Steve what other drivers would you compare the Mtx 9500s to?

[ffry 0]

What do you use for spraying your ports?