nasty irocz Posted April 28, 2012 Report Posted April 28, 2012 Ok so i have a box kevin built me that is port to the side and the dimensions are w36 d17.5 h14.5 and what i was wanting to do was change the face and make it center aero port and have it firing through my seats they fold down but also so i could use them with the seats up. Do you think i would gain any like this? Where do you get aeros at? What size and length would the aero be? thanks alot 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
darkjds Posted April 28, 2012 Report Posted April 28, 2012 http://www.parts-express.com/wizards/searchResults.cfm?FTR=precision+port&search_type=main&WebPage_ID=3&searchFilter=precision+port&x=0&y=0 Current Setup: , 2 Fi sp4 18s in a big ass flat wall tuned to 23hz, Pioneer 80prs, 2 Digital Designs m3bs strapped @ 2 ohms, Banda ICE2000, Crescendo 800.4, 4 PRV 10MR1000s,4 Mclaren MLT300 Super Tweeters Kinetik 2000 XS Power 2700 & XS Power 3100s.
nasty irocz Posted April 28, 2012 Author Report Posted April 28, 2012 thanks for the link to the ports anybody else on size and what length to make it? I was thinkin of tuning it to 30 to 32hz thanks alot 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
HunterJohnson Posted April 28, 2012 Report Posted April 28, 2012 Use Torres box calc but if I had to guess 2 4inch ports 12 inches long Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
nasty irocz Posted April 28, 2012 Author Report Posted April 28, 2012 How do you use the box calc? Where do i find this at and those port sizes would tune me low like im lookin for your thinkin? 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
deathcards Posted April 29, 2012 Report Posted April 29, 2012 http://www.stevemeadedesigns.com/board/topic/38791-torres-box-tuning-calculator/ skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps
nasty irocz Posted April 29, 2012 Author Report Posted April 29, 2012 ok so i messed around with it but when i put in my box dimensions and put 2 ports 12 inches long and sub displacment at .4 thats what i read in one of the posts to put not exactly sure it gives me 34.52hz what am i doin wrong? I was lookin at tuning it to 30hz right now its at 32 from what kevin says 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
nasty irocz Posted April 29, 2012 Author Report Posted April 29, 2012 Ok so now im confused on the port situation i changed it to 2 3 inch ports at 8 inches long and its at 30.69. Then i can get it to tune a lot lower the longer i make the port from 8 inches and so on. 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
nasty irocz Posted April 29, 2012 Author Report Posted April 29, 2012 nobody else? My main concern now is the sub displacment how do you find that out? 2006 impala ls 2 skar vvx12 d4s custom box 32hz hifonics brutus brz1200.1 kenwood excelon knuconceptz wires optima red tops
Ballen194 Posted April 29, 2012 Report Posted April 29, 2012 nobody else? My main concern now is the sub displacment how do you find that out? What size subs are you using? 98 Isuzu Rodeo Pioneer Deh-6300ub SUBS*Upcoming* SSA Xcon 18 4th order AMP Banda 3500 Mids/Highs Pioneer EQ Clarion EQS746 ETC. Two 1/0 run's KnuKoncepts 1/0 big 3 Shuriken BT-100 under the hood Shuriken BT-120 in the back
Recommended Posts